Page 96 / 296
Scroll up to view Page 91 - 95
Chapter 6 Wireless Tutorial
NBG334W User’s Guide
96
Figure 48
Example WPS Process: PIN Method
6.3
Enable and Configure Wireless Security without WPS on
your NBG334W
This example shows you how to cofnigure wireless security settings with the following
parameters on your NBG334W.
Authentication by PIN
SECURITY INFO
WITHIN 2 MINUTES
Wireless Client
NBG334W
COMMUNICATION
SSID
SSID_Example3
Page 97 / 296
Chapter 6 Wireless Tutorial
NBG334W User’s Guide
97
Follow the steps below to configure the wireless settings on your NBG334W.
The instructions require that your hardware is connected (see the Quick Start Guide) and you
are logged into the web configurator through your LAN connection (see
Section 2.2 on page
35
).
1
Open the
Wireless LAN > General
screen in the AP’s web configurator.
2
Make sure the
Enable Wireless LAN
check box is selected.
3
Enter
SSID_Example3
as the SSID and select a channel.
4
Set security mode to
WPA-PSK
and enter
ThisismyWPA-PSKpre-sharedkey
in the
Pre-Shared Key
field. Click
Apply
.
Figure 49
Network > Wireless LAN > General
5
Open the
Status
screen. Verify your wireless and wireless security settings under
Device
Information
and check if the WLAN connection is up under
Interface Status
.
Channel
6
Security
WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
Page 98 / 296
Chapter 6 Wireless Tutorial
NBG334W User’s Guide
98
Figure 50
Status: AP Mode
6.4
Configure Your Notebook
"
We use the ZyXEL M-302 wireless adapter utility screens as an example for
the wireless client. The screens may vary for different models.
1
The NBG334W supports IEEE 802.11b and IEEE 802.11g wireless clients. Make sure
that your notebook or computer’s wireless adapter supports one of these standards.
2
Wireless adapters come with software sometimes called a “utility” that you install on
your computer. See your wireless adapter’s User’s Guide for information on how to do
that.
3
After you’ve installed the utility, open it. If you cannot see your utility’s icon on your
screen, go to
Start > Programs
and click on your utility in the list of programs that
appears. The utility displays a list of APs within range, as shown in the example screen
below.
4
Select SSID_Example3 and click
Connect
.
Page 99 / 296
Chapter 6 Wireless Tutorial
NBG334W User’s Guide
99
Figure 51
Connecting a Wireless Client to a Wireless Network t
5
Select WPA-PSK and type the security key in the following screen. Click
Next
.
Figure 52
Security Settings
6
The
Confirm Save
window appears. Check your settings and click
Save
to continue.
Figure 53
Confirm Save
7
Check the status of your wireless connection in the screen below. If your wireless
connection is weak or you have no connection, see the Troubleshooting section of this
User’s Guide.
Page 100 / 296
Chapter 6 Wireless Tutorial
NBG334W User’s Guide
100
Figure 54
Link Status
8
If your connection is successful, open your Internet browser and enter
http://
www.zyxel.com
or the URL of any other web site in the address bar. If you are able to
access the web site, your wireless connection is successfully configured.
19216811.live