1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. EMG2926-Q10A
    5. /
  5. 34
Page 166 / 236 Scroll up to view Page 161 - 165
Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
166
24.4.1
Account Setup Screen
This screen allows you to change a user account password.
In the
Maintenance
>
Account
screen, click an
Edit
icon under
Modify
. The screen appears as
shown.
Figure 106
Maintenance > Account: Edit
The following table describes the labels in this screen.
24.5
Time Setting Screen
Use this screen to configure the EMG2926-Q10A’s time based on your local time zone. To change
your EMG2926-Q10A’s time and date, click
Maintenance
>
Time
. The screen appears as shown.
Group
The belonging of the user account.
Modify
Click the
Edit
icon to open the Account Setup screen.
Account Setup
screen allows to
change the user account password.
Table 64
Maintenance > Account (continued)
LABEL
DESCRIPTION
Table 65
Maintenance > Account: Edit
LABEL
DESCRIPTION
Username
The user account name.
Old Password
Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays as asterisk (*) for each character you type.
Retype to
Confirm
Type the new password again in this field.
Group
This shows the group belonging of the user account (read-only).
Apply
Click
Apply
to save your changes back to the EMG2926-Q10A.
Cancel
Click
Cancel
to exit this screen without saving.
Page 167 / 236
Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
167
Figure 107
Maintenance > Time
The following table describes the labels in this screen.
Table 66
Maintenance > Time
LABEL
DESCRIPTION
Current Time and Date
Current Time
This field displays the time of your EMG2926-Q10A.
Each time you reload this page, the EMG2926-Q10A synchronizes the time with the time
server.
Current Date
This field displays the date of your EMG2926-Q10A.
Each time you reload this page, the EMG2926-Q10A synchronizes the date with the time
server.
Current Time and Date Setup
Manual
Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time configured
manually.
When you select
Manual
, enter the new time in this field and then click
Apply
.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select
Manual
, enter the new date in this field and then click
Apply
.
Get from Time
Server
Select this radio button to have the EMG2926-Q10A get the time and date from the time
server you specified below.
Page 168 / 236
Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
168
24.6
Firmware Upgrade Screen
Find firmware at
www.zyxel.com
in a file that (usually) uses the system model name with a “*.bin”
extension, e.g., “EMG2926-Q10A.bin”. The upload process uses HTTP (Hypertext Transfer Protocol)
and may take up to two minutes. After a successful upload, the system will reboot.
Click
Maintenance > Firmware Upgrade
. Follow the instructions in this screen to upload
firmware to your EMG2926-Q10A.
User Defined
Time Server
Address
Enter the IP address or URL (up to 20 extended ASCII characters in length) of your time
server. Check with your ISP/network administrator if you are unsure of this information.
Time Zone Setup
Time Zone
Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
Daylight
Savings
Daylight saving is a period from late spring to early fall when many countries set their clocks
ahead of normal local time by one hour to give more daytime light in the evening.
Select this option if you use Daylight Saving Time.
Start Date
Configure the day and time when Daylight Saving Time starts if you selected
Daylight
Savings
. The
o’clock
field uses the 24 hour format. Here are a couple of examples.
Daylight Saving Time starts in most parts of the United States on the first Sunday of April.
Each time zone in the United States starts using Daylight Saving Time at 2 A.M local time.
So in the United States you would select
First
,
Sunday
,
April
and type 2 in the
o’clock
field.
Daylight Saving Time starts in the European Union on the last Sunday of March. All of the
time zones in the European Union start using Daylight Saving Time at the same moment (1
A.m. GMT or UTC). So in the European Union you would select
Last
,
Sunday
,
March
. The
time you type in the
o’clock
field depends on your time zone. In Germany for instance, you
would type 2 because Germany’s time zone is one hour ahead of GMT or UTC (GMT+1).
End Date
Configure the day and time when Daylight Saving Time ends if you selected
Daylight
Savings
. The
o’clock
field uses the 24 hour format. Here are a couple of examples.
Daylight Saving Time ends in the United States on the last Sunday of October. Each time
zone in the United States stops using Daylight Saving Time at 2 A.M. local time. So in the
United States you would select
Last, Sunday, October
and type 2 in the
o’clock
field.
Daylight Saving Time ends in the European Union on the last Sunday of October. All of the
time zones in the European Union stop using Daylight Saving Time at the same moment (1
A.M. GMT or UTC). So in the European Union you would select
Last, Sunday, October
. The
time you type in the
o’clock
field depends on your time zone. In Germany for instance, you
would type 2 because Germany’s time zone is one hour ahead of GMT or UTC (GMT + 1).
Apply
Click
Apply
to save your changes back to the EMG2926-Q10A.
Cancel
Click
Cancel
to exit this screen without saving.
Table 66
Maintenance > Time (continued)
LABEL
DESCRIPTION
Page 169 / 236
Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
169
Figure 108
Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Do not turn off the EMG2926-Q10A while firmware upload is in progress!
After you see the
Firmware Upload In Process
screen, wait two minutes before logging into the
EMG2926-Q10A again.
The EMG2926-Q10A automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 109
Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the
Status
screen.
If the upload was not successful, an error message appears.
24.7
Configuration Backup/Restore Screen
Backup configuration allows you to back up (save) the EMG2926-Q10A’s current configuration to a
file on your computer. Once your EMG2926-Q10A is configured and functioning properly, it is highly
recommended that you back up your configuration file before making configuration changes. The
backup configuration file will be useful in case you need to return to your previous settings.
Table 67
Maintenance > Firmware Upgrade
LABEL
DESCRIPTION
Firmware Upgrade
File Path
Type in the location of the file you want to upload in this field or click
Browse...
to find it.
Browse...
Click
Browse...
to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload
Click
Upload
to begin the upload process. This process may take up to two minutes.
Page 170 / 236
Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
170
Restore configuration allows you to upload a new or previously saved configuration file from your
computer to your EMG2926-Q10A.
Click
Maintenance > Backup/Restore
. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
Figure 110
Maintenance > Backup/Restore
The following table describes the labels in this screen.
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default
EMG2926-Q10A IP address (192.168.1.1). See
Appendix B on page 191
for details
on how to set up your computer’s IP address.
Table 68
Maintenance > Backup/Restore
LABEL
DESCRIPTION
Backup Configuration
Backup
Click
Backup
to save the EMG2926-Q10A’s current configuration to your computer.
Restore Configuration
File Path
Click
Choose File
to browse to the location of the configuration file in your computer.
Upload
Click
Upload
to begin the upload process.
Note: Do not turn off the EMG2926-Q10A while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute
before logging into the EMG2926-Q10A again. The EMG2926-Q10A automatically restarts in
this time causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Reset
Pressing the
Reset
button in this section clears all user-entered configuration information
and returns the EMG2926-Q10A to its factory defaults.
You can also press the
RESET
button on the rear panel to reset the factory defaults of your
EMG2926-Q10A. Refer to the chapter about introducing the Web Configurator for more
information on the
RESET
button.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top