1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. EMG2926-Q10A
    5. /
  5. 28
Page 136 / 236 Scroll up to view Page 131 - 135
Chapter 19 StreamBoost Management
EMG2926-Q10A User’s Guide
136
Figure 81
Management > StreamBoost Management > All Events
Page 137 / 236
EMG2926-Q10A User’s Guide
137
C
HAPTER
20
Remote Management
20.1
Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your EMG2926-Q10A from a remote location through
the following interfaces:
•
LAN and WAN
•
LAN only
•
WAN only
Note: The EMG2926-Q10A is managed using the Web Configurator.
20.2
What You Can Do in this Chapter
•
Use the
WWW
screen to define the interface/s from which the EMG2926-Q10A can be managed
remotely using the web and specify a secure client that can manage the EMG2926-Q10A (
Section
20.4 on page 138
).
•
Use the
Telnet
screen to define the interface/s from which the EMG2926-Q10A can be managed
remotely using Telnet service and specify a secure client that can manage the EMG2926-Q10A
(
Section 20.5 on page 139
).
•
Your EMG2926-Q10A can act as an SNMP agent, which allows a manager station to manage and
monitor the EMG2926-Q10A through the network. Use the
SNMP
screen to configure SNMP
settings. You can also specify from which IP addresses the access can come (
Section 20.6 on
page 140
).
•
Use the
Wake On LAN
screen to enable Wake on LAN and remotely turn on a device on the local
network (
Section 20.7 on page 142
).
•
Use the
TR069
screen to configure the EMG2926-Q10A’s TR-069 auto-configuration settings and
import CA certificates to the EMG2926-Q10A (
Section 20.8 on page 143
).
20.3
What You Need to Know
Remote management over LAN or WAN will not work when:
1
The IP address in the
Secured Client IP Address
field (
Section 20.4 on page 138
) does not match
the client IP address. If it does not match, the EMG2926-Q10A will disconnect the session
immediately.
Page 138 / 236
Chapter 20 Remote Management
EMG2926-Q10A User’s Guide
138
2
There is already another remote management session. You may only have one remote
management session running at one time.
3
There is a firewall rule that blocks it.
20.3.1
Remote Management and NAT
When NAT is enabled:
•
Use the EMG2926-Q10A’s WAN IP address when configuring from the WAN.
•
Use the EMG2926-Q10A’s LAN IP address when configuring from the LAN.
20.3.2
System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The
EMG2926-Q10A automatically logs you out if the management session remains idle for longer than
this timeout period. The management session does not time out when a statistics screen is polling.
You can change the timeout period in the
Maintenance > General
screen
20.4
WWW Screen
To change your EMG2926-Q10A’s remote management settings, click
Configuration
>
Management
>
Remote MGMT
to open the
WWW
screen.
Figure 82
Configuration > Management > Remote MGMT > WWW
Page 139 / 236
Chapter 20 Remote Management
EMG2926-Q10A User’s Guide
139
The following table describes the labels in this screen.
20.5
Telnet Screen
To change your EMG2926-Q10A’s remote management settings, click
Management > Remote
MGMT > Telnet
to open the
Telnet
screen.
Figure 83
Management > Remote MGMT > Telnet
Table 53
Configuration > Management > Remote MGMT > WWW
LABEL
DESCRIPTION
HTTPS
Port
You may change the server port number for a HTTPS service if needed. However you
must use the same port number in order to use that service for remote management.
Access Status
Select the interface(s) through which a computer may access the EMG2926-Q10A using
this HTTPS service.
Secured Client IP
Address
Select
All
to allow all computers to access the EMG2926-Q10A using the HTTPS service.
Otherwise, check
Selected
and specify the IP address of the computer that can access
the EMG2926-Q10A.
HTTP
Port
You may change the server port number for a HTTP service if needed. However you
must use the same port number in order to use that service for remote management.
Access Status
Select the interface(s) through which a computer may access the EMG2926-Q10A using
this HTTP service.
Secured Client IP
Address
Select
All
to allow all computers to access the EMG2926-Q10A using this HTTP service.
Otherwise, check
Selected
and specify the IP address of the computer that can access
the EMG2926-Q10A.
Apply
Click
Apply
to save your customized settings and exit this screen.
Cancel
Click
Cancel
to exit this screen without saving.
Page 140 / 236
Chapter 20 Remote Management
EMG2926-Q10A User’s Guide
140
The following table describes the labels in this screen.
20.6
SNMP Screen
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your EMG2926-Q10A supports SNMP agent functionality, which allows a
manager station to manage and monitor the EMG2926-Q10A through the network. The EMG2926-
Q10A supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next figure illustrates
an SNMP management operation.
Figure 84
SNMP Management Model
An SNMP managed network consists of two main types of component: agents and a manager.
An agent is a management software module that resides in a managed device (the EMG2926-
Q10A). An agent translates the local management information from the managed device into a
form compatible with SNMP. The manager is the console through which network administrators
perform network management functions. It executes applications that control and monitor
managed devices.
Table 54
Management > Remote MGMT > Telnet
LABEL
DESCRIPTION
Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Access Status
Select the interface(s) through which a computer may access the EMG2926-Q10A
using this service.
Secured Client IP
Address
Select
All
to allow all computes to access the EMG2926-Q10A.
Otherwise, check
Selected
and specify the IP address of the computer that can
access the EMG2926-Q10A.
Apply
Click
Apply
to save your customized settings.
Cancel
Click
Cancel
to begin configuring this screen afresh.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top