1. Home
    2. /
  2. Manuals
    3. /
  3. Zyxel
    4. /
  4. EMG2926-Q10A
    5. /
  5. 25
Page 121 / 236 Scroll up to view Page 116 - 120
Chapter 17 Parental Control
EMG2926-Q10A User’s Guide
121
Figure 71
Security > Parental Control
The following table describes the fields in this screen.
17.2.1
Add/Edit a Parental Control Rule
Click
Add
new rules
in the
Parental Control
screen to add a new rule or click the
Edit
icon next
to an existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL
filtering settings to block the users on your network from accessing certain web sites.
Table 48
Security > Parental Control
LABEL
DESCRIPTION
Parental
Control
Select
Enable
to activate parental control.
Add new rules
Click this if you want to configure a new parental control rule.
#
This shows the index number of the rule.
Status
This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
Rule Name
This shows the name of the rule.
Home Network
User (MAC)
This shows the MAC address of the LAN user’s computer to which this rule applies.
Internet Access
Schedule
This shows the day(s) and time on which parental control is enabled.
Network
Service
This shows whether the network service is configured. If not,
None
will be shown.
Website
Blocked
This shows whether the website block is configured. If not,
None
will be shown.
Modify
Click the
Edit
icon to go to the screen where you can edit the rule.
Click the
Delete
icon to delete an existing rule.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
Page 122 / 236
Chapter 17 Parental Control
EMG2926-Q10A User’s Guide
122
Figure 72
Security > Parental Control: Add/Edit new rules
The following table describes the fields in this screen.
Table 49
Security > Parental Control: Add/Edit new rules
LABEL
DESCRIPTION
General
Active
Select the checkbox to activate this parental control rule.
Parental
Control Profile
Name
Enter a descriptive name for the rule.
Page 123 / 236
Chapter 17 Parental Control
EMG2926-Q10A User’s Guide
123
17.2.2
Add/Edit a Service
Click
Add
new service
in the
Parental Control > Add/Edit new rules
screen to add a new
entry or click the
Edit
icon next to an existing entry to edit it. Use this screen to configure a service
rule.
Figure 73
Security > Parental Control > Add/Edit new rules > Add/Edit new service
Home Network
User
Select the LAN user that you want to apply this rule to from the drop-down list box. If you
select
Custom
, enter the LAN user’s MAC address. If you select
All
, the rule applies to all
LAN users.
Internet Access Schedule
Day
Select check boxes for the days that you want the EMG2926-Q10A to perform parental
control.
Time
Drag the time bar to define the time that the LAN user is allowed access.
Network Service
Network
Service Setting
If you select
Block
, the EMG2926-Q10A prohibits the users from using the services listed
below.
If you select
Allow
, the EMG2926-Q10A blocks all services except ones listed below.
Add new
service
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name
,
Protocol
, and
Port
of the new rule.
#
This shows the index number of the rule. Select the checkbox next to the rule to activate it.
Service Name
This shows the name of the service.
Protocol:Port
This shows the protocol and the port of the service.
Modify
Click the
Edit
icon to go to the screen where you can edit the rule.
Click the
Delete
icon to delete an existing rule.
Blocked Site/
URL Keyword
Click
Add
to show a screen to enter the website URL or URL keyword to which the
EMG2926-Q10A blocks access. Click
Delete
to remove it.
Apply
Click
Apply
to save your settings back to the EMG2926-Q10A.
Back
Click
Back
to return to the previous screen.
Table 49
Security > Parental Control: Add/Edit new rules (continued)
LABEL
DESCRIPTION
Page 124 / 236
Chapter 17 Parental Control
EMG2926-Q10A User’s Guide
124
The following table describes the fields in this screen.
17.3
Technical Reference
The following section contains additional technical information about the EMG2926-Q10A features
described in this chapter.
17.3.1
Customizing Keyword Blocking URL Checking
You can use commands to set how much of a website’s URL the content filter is to check for
keyword blocking. See the appendices for information on how to access and use the command
interpreter.
Domain Name or IP Address URL Checking
By default, the EMG2926-Q10A checks the URL’s domain name or IP address when performing
keyword blocking.
This means that the EMG2926-Q10A checks the characters that come before the first slash in the
URL.
For example, with the URL
www.zyxel.com.tw/news/pressroom.php
, content filtering only searches
for keywords within
www.zyxel.com.tw
.
Full Path URL Checking
Full path URL checking has the EMG2926-Q10A check the characters that come before the last
slash in the URL.
For example, with the URL
www.zyxel.com.tw/news/pressroom.php
, full path URL checking
searches for keywords within
www.zyxel.com.tw/news/
.
Use the
ip urlfilter customize actionFlags 6 [disable | enable]
command to extend (or
not extend) the keyword blocking search to include the URL's full path.
Table 50
Security > Parental Control > Add/Edit new rules > Add/Edit new service
LABEL
DESCRIPTION
Service Name
Select the name of the service. Otherwise, select
UserDefined
and manually specify the
name, protocol and the port of the service.
Protocol
Select the transport layer protocol used for the service. Choices are
TCP
,
UDP
, or
TCP/
UDP
.
If you have chosen a pre-defined service in the
Service Name
field, this field will not be
configurable.
Port
Enter the port of the service.
If you have chosen a pre-defined service in the
Service Name
field, this field will not be
configurable.
Apply
Click
Apply
to save your settings with the EMG2926-Q10A.
Back
Click
Back
to return to the previous screen.
Page 125 / 236
Chapter 17 Parental Control
EMG2926-Q10A User’s Guide
125
File Name URL Checking
Filename URL checking has the EMG2926-Q10A check all of the characters in the URL.
For example, filename URL checking searches for keywords within the URL
www.zyxel.com.tw/
news/pressroom.php
.
Use the
ip urlfilter customize actionFlags 8 [disable | enable]
command to extend (or
not extend) the keyword blocking search to include the URL's complete filename.

Rate

4 / 5 based on 1 vote.

Popular Zyxel Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top