Chapter 2 Introducing the Web Configurator
ericom D1000 modem User’s Guide
23
Filter
IP/MAC Filter
Use this screen to configure IPv4/MAC filtering rules for incoming
or outgoing traffic.
IPv6/MAC Filter
Use this screen to configure IPv6/MAC filtering rules for incoming
or outgoing traffic.
Firewall
General
Use this screen to activate/deactivate the firewall.
Default Action
Use this screen to set the default action that the firewall takes on
packets that do not match any of the firewall rules.
Rules
Use this screen to view the configured firewall rules and add, edit
or remove a firewall rule.
DoS
Use this screen to set the thresholds that the Device uses to
determine when to start dropping sessions that are not fully
established (half-open sessions).
Parental Control
Parental Control
Use this screen to define time periods and days during which the
Device performs parental control and/or block web sites with the
specific URL.
Certificates
Local Certificates
Use this screen to export self-signed certificates or certification
requests and import the Device’s CA-signed certificates.
Trusted CA
Use this screen to save CA certificates to the Device.
System Monitor
Log
Log
Use this screen to view the logs for the level that you selected.
You can export or e-mail the logs.
Traffic Status
WAN
Use this screen to view the status of all network traffic going
through the WAN port of the Device.
LAN
Use this screen to view the status of all network traffic going
through the LAN ports of the Device.
NAT
Use this screen to view the status of NAT sessions on the Device.
Maintenance
Users Account
Users Account
Use this screen to configure the passwords your user accounts.
System
System
Use this screen to configure management inactivity time-out
setting.
Time Setting
Time Setting
Use this screen to change your Device’s time and date.
Log Setting
Log Setting
Use this screen to configure the Device’s log settings and which
logs and/or immediate alerts the Device is to record.
Firmware
Upgrade
Firmware Upgrade
Use this screen to upload firmware to your Device.
Backup/Restore
Backup/Restore
Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Reboot
Reboot
Use this screen to reboot the Device without turning the power
off.
Remote MGMT
WWW, Telnet, FTP,
SNMP, DNS, ICMP,
SSH
Use this screen to enable specific traffic directions for specific
network service.
Diagnostic
Ping
Use this screen to test the connections to other devices.
DSL Line
Use this screen to identify problems with the DSL connection.
Table 1
Navigation Panel Summary (continued)
LINK
TAB
FUNCTION
19216811.live