Page 16 / 228 Scroll up to view Page 11 - 15
ericom D1000 modem User’s Guide
16
Page 17 / 228
ericom D1000 modem User’s Guide
17
C
HAPTER
2
Introducing the Web Configurator
2.1
Overview
The web configurator is an HTML-based management interface that allows easy device setup and
management via Internet browser. Use Internet Explorer 6.0 and later versions, Mozilla Firefox 3
and later versions, or Safari 2.0 and later versions. The recommended screen resolution is 1024 by
768 pixels.
In order to use the web configurator, you need to allow:
Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
JavaScript (enabled by default).
Java permissions (enabled by default).
2.1.1
Accessing the Web Configurator
1
Make sure your Device hardware is properly connected.
2
Launch your web browser.
3
Type "192.168.1.254" as the URL.
4
A password screen displays. Type “admin” (default) as the username and enter the default
password (which is the same as the wireless key on the Device’s back label), then click
Login
. If
you have changed the password, enter your new password and click
Login
.
Figure 3
Password Screen
Note: For security reasons, the Device automatically logs you out if you do not use the
web configurator for 900 seconds (default). If this happens, log in again.
Page 18 / 228
Chapter 2 Introducing the Web Configurator
ericom D1000 modem User’s Guide
18
5
If you enter the wrong username and/or password three times, the Device lockes you out of the
login screen for ten minutes and the following screen displays.
Figure 4
Lockout Screen
6
The following screen displays if you have not yet changed your password. It is strongly
recommended you change the default password. Enter a new password, retype it to confirm and
click
Apply
; alternatively click
Skip
to proceed to the next screen if you do not want to change the
password now.
Figure 5
Change Password Screen
The following screen displays and asks if you want to change your wireless settings, including SSID
and wireless security key. If you have changed the settings, click
Apply
. If not, click
Skip
to
proceed to the
Connection Status
screen if you do not want to change them now.
Page 19 / 228
Chapter 2 Introducing the Web Configurator
ericom D1000 modem User’s Guide
19
Figure 6
Change Wireless Settings Screen
7
The
Connection Status
screen appears.
Figure 7
Connection Status
8
The
System Info
screen shows. You can view the Device’s interface and system information.
Page 20 / 228
Chapter 2 Introducing the Web Configurator
ericom D1000 modem User’s Guide
20
2.2
The Web Configurator Layout
Figure 8
Web Configurator Layout Screen
As illustrated above, the main screen is divided into these parts:
A
- title bar
B
- main window
C
- navigation panel
2.2.1
Title Bar
The title bar shows the following icon in the upper right corner.
Click this icon to log out of the web configurator.
Click the
Help
icon to go to eircom’s support website. Click the
Logout
icon to log out of the web
configurator.
2.2.2
Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
A
B
C

Rate

5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top