1. Home
    2. /
  2. Manuals
    3. /
  3. ZTE
    4. /
  4. ZXDSL531B
    5. /
  5. 9
Page 41 / 77 Scroll up to view Page 36 - 40
Chapter 5: Web Configuration
33
Status
: Displays the current status of the ADSL Router, including DSL Connection, WAN
Connection, Traffic Counter, Routing Table, DHCP Table and Wireless Clent.
Configuration
: It displays the configuration categories of the ADSL Router, including DSL, LAN,
WLAN, WAN, IP Route, DNS, Security, Virtual Server, IGMP Proxy and UPnP settings.
You can move the mouse cursor over the sub-menu to display the hierarchy popup menu. Clicking
on each of the item will bring out its content in main window accordingly.
±
Main Window
: It is the current workspace of the web management, containing configuration or status
information.
To Have the New Settings Take Effect
The ADSL Router uses the following mechanism to enable new settings:
±
Apply
button.
When
Apply
is clicked, your customizations will only be stored to the DRAM. If you do not execute
Save
&
Restart
, the customizations will not take effect for rebooting the ADSL Router next time.
±
Save & Restart
button.
When
Save
is clicked, your customizations will be saved to the flash memory. After clicking
Restart
, your
customizations take effect.
Quick start
On this page you can select the VPI/VCI value for the connection mode you use. Execute
Apply and Save
to change
and save the configuration.
Please use the drop-down menu to the right side and select the one which suits for your system. Then click on
Apply
and
Save
to show the selected profile data. Different connection modes have different connection result. See the
following for reference.
If you want block the connection, just click the
Action
mode—
Disconnect
button. If you choose any one of RFC
series profiles, there is no Connect button on the Action mode. In addition, you can click on the item below
VPI/VCI
to show/modify the more detail configurations.
On this home page, you are allowed to change Username and Password for default PPPoE mode.
Page 42 / 77
ADSL Router User Manual
34
User Name:
The name put here is the one that you set on the WAN Configuration web page.
Password:
The password put here is the one that you set on the WAN Configuration web page.
Connect and Save:
Please click this button to make the PPP connection enabled.
System
Device Information
This page shows the basic information of your ADSL Router, including the hardware board and software version, etc.
It provides a general overview of your ADSL Router.
Administration
There are three types of administration, Account, Remote Access and Web Port.
Account
It limits this web-based manager access to users with the correct user name and password. After entering user name
& password, click
Apply
. By default, both the user name and password values are
admin
.
To change the user account, type in the new user name, new password and retype the new password on the Confirm
Password box. Last, click Apply to finish changing.
After clicking
Apply
to change the user name and password, the new setting takes effect immediately. When you
continue to access other pages, you will be prompted to re-login with new user name and password immediately.
Page 43 / 77
Chapter 5: Web Configuration
35
To save the new settings to flash memory and take effect next time your reboot the ADSL Router, after clicking
Apply
, you should perform the task of
Save Configuration
.
Remote Management
This function allows remote client to access this router from WAN side. You can set the lease time and click
Enable
to enable this setting. Please click the first radio button and type in the duration time on the box or click on the
second radio button to choose unlimited time.
To disable this function, just click
Disable
.
Web Port
The default web server port is 80. You can change the web server port to another one and then click
Apply
to enable
this setting.
Note:
Clicking
Apply
will enable the new setting right away. When you continue to access
other pages, you will need to re-login at new web port.
Page 44 / 77
ADSL Router User Manual
36
Backup Configuration
This web page allows you to backup the configuration settings to your computer for retrieving next time. Click on
Backup
button to backup your configuration to your hard disk.
In addition, to retrieve the saved configuration and use again, use
Browse
to locate the backup configuration file.
After selecting the desired file, please click
Restore
to use it for current web page.
Save Configuration
This page allows you to save all current configuration settings to non-volatile memory. Please wait for several
seconds to complete this process.
Upgrade Software
The ADSL Router supports the upgrading by using HTTP. To transfer the firmware file, follow the steps below:
1.
Download and unzip the new software file from vendor.
2.
In the
File Name of Firmware
field, click
Browse
to locate the upgrade files.
3.
Click the
Upgrade
button.
Page 45 / 77
Chapter 5: Web Configuration
37
After upgrading, the original configuration will still exist and not reset to the factory defaults.
Reset Router
This page allows you to restart your router for invoking new configuration. After restarting, you should wait for
several seconds to let the system come up. When restarting the system, your brower session will be disconnected.
Please wait until the device finish restarting.
Note:
If
Reset to factory default settings
is checked, the settings will return to factory
defaults, including the
Username
and
Password
.

Rate

4.5 / 5 based on 2 votes.

Popular ZTE Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top