Page 31 / 77
Scroll up to view Page 26 - 30
Chapter 4:Configuration
23
For Windows 2000
1.
From the Start menu, point to Settings and then click Network and Dial-up Connections.
2.
Right-click the
Local Area Connection
icon and then click
Properties
.
3.
On the
General
tab, check out the list of installed network components.
Option 1:
If you have
no
TCP/IP Protocol, click
Install
.
Option 2:
If you have TCP/IP Protocol, go to Step 6.
4.
Highlight
Protocol
and then click
Add
.
Page 32 / 77
ADSL Router User Manual
24
5.
Click Internet Protocol(TCP/IP) and then click OK.
6.
When returning to Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) and then
click Properties.
7.
Under the
General
tab, enable
Use the following IP Address
. Enter the
IP address
:
192.168.100.x
(x is
between 2 and 254),
Subnet Mask
:
255.255.255.0
and
Default
gateway
:
192.168.100.100
. Then click
OK
.
When prompted to restart your computer, reboot it to enable the settings.
Page 33 / 77
Chapter 4:Configuration
25
For Windows XP
1.
From the
Start
menu, point to
Control Panel
and then click
Network and Internet
Connections
.
2.
Click
Network Connection
and then click
Properties
.
3.
On the
General
tab, check out the list of installed network components.
Option 1:
If you have
no
TCP/IP Protocol, click
Install
.
Option 2:
If you have TCP/IP Protocol, go to Step 6.
4.
Highlight
Protocol
and then click
Add
.
5.
Click
Internet
Protocol(TCP/IP)
and then click
OK
.
6.
On the
Local Area Connection Properties
window, highlight
Internet
Protocol (TCP/IP)
and then click
Properties
.
7.
Under the
General
tab, enable
Use the following IP address
. Enter the
IP address
:
192.168.100.x
(x is
between 2 and 254),
Subnet Mask
:
255.255.255.0
and
Default
gateway
:
192.168.100.100
. Then click Ok.
Page 34 / 77
ADSL Router User Manual
26
Configure PC to get IP address from DHCP
If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should configure the client PCs
to obtain a dynamic IP address. Please follow the previous section to install TCP/IP component. Only that you do not
need to specify an IP address when configuring TCP/IP properties.
The following section describe the procedures for CPEs to get IP address:
For Windows 98
On the
IP Address
tab, select
Obtain an IP address automatically
. Then click
OK
.
Page 35 / 77
Chapter 4:Configuration
27
For Windows ME
On the
IP Address
tab, select
Obtain an IP address automatically
. Then click
OK
.
For Windows NT
On the
IP Address
tab, click on the drop-down arrow of
Adapter
to select required adapter. Enable
Obtain an IP
address from a DHCP
server
and then click
OK
.
When prompted with the message below, click
Yes
to continue.
For Windows 2000
Enable
Obtain an IP address automatically
and then click OK.
19216811.live