ZTE ZXDSL 931VII Netvigator Router Manual PDF (Setup & Configuration Guide)

Page 21 / 198 Scroll up to view Page 16 - 20

Chapter 2 Hardware Installation

2.

Connect the

LAN

port of the 931WII to the network card of the

PC with an Ethernet line.

3.

Plug one end of the power adapter to the wall outlet and con-

nect the other end to the

PWR

port of the 931WII.

E

ND OF STEPS

Factory Reset Button

The 931WII may be reset to the original factory default settings

by pressing the reset button for a few seconds while the device is

powered ON Use a ballpoint or paperclip to gently push down the

reset button.

Remember that this wipes out any settings stored in the ﬂash

memory, including user account information and LAN IP settings.

The device settings are restored to the following factory defaults:

the IP address is 192.168.1.1, subnet mask is 255.255.255.0, user

name for management is

admin

, and password is

admin

.

Conﬁdential and Proprietary Information of ZTE CORPORATION

15

Page 22 / 198

ZXDSL 931WII Operation manual

This page is intentionally blank.

16

Conﬁdential and Proprietary Information of ZTE CORPORATION

Page 23 / 198

C

h

a

p

t

e

r

3

Setting Up the Device

Table of Contents

About the Device

...............................................................

17

Hardware

Conﬁguration

of

the

Device

and

PC

Conﬁgura-

tion

.................................................................................

18

About the Device

The 931WII provides a wide range of compelling broadband-based

applications

and

services

and

includes

an

operating

system,

drivers and remote management capabilities.

931WII delivers

a set of highly integrated solutions, required for the home and

small company, such as:

�

Optimized Linux 2.6 operating system

�

IP routing and bridging

�

Point-to-point protocol (PPP)

�

Network/port address translation (NAT/PAT)

�

Quality of service (QoS)

�

Wireless LAN security: WPA, 802.1x, RADIUS client

�

VPN: IPSec

�

Secure Socket Layer (SSL) VPN

�

Universal plug-and-play

�

File server for network attached storage (NAS) devices

�

Print server

�

Web ﬁltering

�

Management and Control:

�

Web-based management (WBM)

�

Simple network management protocol (SNMP)

�

Command line interface (CLI)

�

TR-069 WAN management protocol

�

Remote update

�

System statistics and monitoring

Conﬁdential and Proprietary Information of ZTE CORPORATION

17

Page 24 / 198

ZXDSL 931WII Operation manual

�

Oriented to the following platforms:

DSL modems, wireless

access points and bridge.

Hardware Configuration

of the Device and PC

Configuration

Connecting your computer or home network to the 931WII is a

simple procedure, varying slightly depending on the operating sys-

tem. This chapter guides you to seamlessly integrate the 931WII

with your computer or home network. The Windows default net-

work settings dictate that in most cases the setup procedure de-

scribed as follows is unnecessary. For example, the default

DHCP

setting in Windows 2000 is ’client’, requiring no further modiﬁca-

tion. However, it is advised to follow the setup procedure described

as follows to verify that all communication parameters are valid

and that the physical cable connections are correct.

The setup procedure consists of three consecutive conﬁguration

stages:

1.

Set up

WAN

and

LAN

connections.

2.

Perform PC network conﬁguration.

3.

Conﬁgure the 931WII through the Web-based management

page.

F

IGURE

4 H

ARDWARE

C

ONFIGURATION

Setting Up WAN and LAN

Connections

WAN Connection

Your connection to the Internet by

DSL

modem connects its DSL

socket to the wall socket by using a telephone cable.

If it has

an Ethernet socket for the wide area network (WAN), connect it

to the external modem you have, or to the Ethernet socket you

might have, by using an Ethernet cable.

18

Conﬁdential and Proprietary Information of ZTE CORPORATION

Page 25 / 198

Chapter 3 Setting Up the Device

LAN Connection

Your computer can connect to the gateway in various ways (such

as Ethernet and wireless), each requiring a different physical con-

nection, if any in case of wireless. The most common type of con-

nection is Ethernet, with most platforms featuring four such ports.

Use an Ethernet cable to connect an Ethernet port on the 931WII

and the network card of your computer.

For additional informa-

tion, refer to the accompanying Installation Guide.

PC Network Configuration

Each network interface on the PC should either be conﬁgured with

a statically deﬁned IP address and

DNS

address, or be instructed

to automatically obtain an IP address using the network

DHCP

server.

The 931WII provides a DHCP server on its

LAN

and it is

recommended to conﬁgure your LAN to automatically obtain its IP

address and DNS server IP address.

The conﬁguration principle

is identical but should be carried out differently on each operating

system.

F

i

g

u

r

e

5

displays the

TCP/IP Properties

dialog box as it appears

on Windows XP.

F

IGURE

5 IP

AND

DNS C

ONFIGURATION

Conﬁdential and Proprietary Information of ZTE CORPORATION

19

Rate

Popular ZTE Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share