ZTE Unite US Cellular Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Unite US Cellular

Page 16 / 29 Scroll up to view Page 11 - 15



Default Policy:

Set how to handle the packet if any of the rules matches.



Source IP Address:

Set the source IP address that will be filtered.



Source Submask:

Set the source submask that will be filtered.



Protocol:

Set which protocol will be used for filtering.



Source Port Range:

Set the source port numbers that will be filtered.



Dest Port Range:

Set the destination port numbers that will be filtered.

How to add a new rule:

1. Select

Enable

and click

Apply

in the

Basic Settings

area.

2. Input the detail information in the

IP/Port Filter Settings

area.

3. Click

Add

in the

IP/Port Filtering Settings

area.

In the

Current IP/Port filtering rules in system

area, click

Delete

to delete the rules that you selected.

Select

Firewall > Port Forwarding

to access:

If you select

Enable

, the Virtual Server Settings will appear:



IP Address:

Set IP address for the virtual server.



Port:

Set port number for the virtual server.



Protocol:

Set the protocol for the virtual server.

How to add a virtual server:

1. Select

Enable

and input the detailed information in the

Virtual Server Settings

area.

2. Click

Apply

to save your settings.

In the

Current Virtual Servers in system

area, click

Delete

to delete the virtual servers that you selected.

Select

Firewall > VPN

to enable/disable the VPN Connection.

Page 17 / 29

Text Message

After logging in, select

Text Messages

to view or delete your messages stored in the

Inbox

Select

Text Messages > Settings

enable or disable your ZTE Unite to receive text messages during it

powers on.

NOTE:

Enable this feature to receive messages in 4G LTE network when the ZTE Unite is powered on.

Advanced

After logging in, select

Advanced > Status

to display the system information.

Select

Advanced > Statistics

to check your WAN usage. Click

Refresh

to update the usage, and click

USCC

to visit the U.S. Cellular website to check your monthly total data.

Page 18 / 29

Select

Advanced > Restore&Reboot

to restart your ZTE Unite, or restore it to the factory default settings.

Select

Advanced > Sound Alert

to turn on/off the sound alert.

Select

Advanced > Activate

to choose how the SIM card is activated. You can either activate it once ZTE

Unite

is powered on, or activate manually by clicking the

Activate

button.

Page 19 / 29

Navigating the Device

Slide the

Power Switch

to the

position to turn on the ZTE Unite. The screen lights up. After the

initialization of the ZTE Unite, the SSID and default password will display on the screen. Press the

button

, the following icons will appear:

NOTE

: Devices and software are constantly evolving — the screen images and icons displayed are for

reference only and may differ from your device.

WAN Info

Select

and press the

OK button

to check the WAN information. Use the

and

DOWN

buttons

scroll to the desired menu. Press the

OK button

to view information about the following WAN settings:



Network Provider:

Displays the name of your service provider.



Network type:

Displays your network type.



Roam

: Displays whether or not your ZTE Unite is roaming.



WAN Connection:

Check your connection status.

WLAN Info

Select

using the

and

DOWN

buttons

and press the

OK button

to check the following information.

Use the

and

DOWN

buttons

to scroll to the desired menu. Press the

OK button

to view information

settings:



SSID Information:

Displays the SSID and password.



Connected Device:

Displays the information about connected Wi-Fi devices.



Start WPS:

Launch the Wi-Fi Protection Setup. Read the prompt on the display and refer to the

Usage Of Wi-Fi Protected Setup (WPS)

chapter.

Settings

Select

using the

and

DOWN

buttons

and press the

OK button

to check the following information.

Use the

and

DOWN

buttons

to scroll to the desired menu. Press the

OK button

to view information

settings:



Device Info:

Displays the basic information about your device:

Phone Number

SIM ID

MEID

Version

PRI Version

and

RSSI



Data Connection:

Connect or disconnect the WAN connection.



Data Roaming:

Enable or disable the WAN connection when your ZTE Unite is roaming.



Network Select:

Choose the desired network from the following options:

4G LTE/CDMA Mode

and

CDMA Only Mode



Receive Text Messages:

Enable or disable your ZTE Unite to receive text messages in 4G LTE

network during power on.



Wi-Fi:

Select

Proceed

to adjusting your Wi-Fi settings or

Back

to return to the previous menu.

Page 20 / 29

The following Wi-Fi settings appear when you select

Proceed



Wi-Fi Network Mode:

Change the Wi-Fi standard.(It is recommended that you do not change

the defualt setting,

11 b/g/n



SSID Broadcast:

Enable or disable discovery mode, allowing your device to be found

other Wi-Fi compatible devices.



AP Isolation:

Enable or Disable the connection between connected Wi-Fi devices

communicating with each other.



Channel:

Choose the appropriate channel frequency to optimize the performance and

coverage of your wireless network.



MAX Connections:

Choose the maximum number of Wi-Fi devices that can be connected to

your device simultaneously.



Web User Interface:

Indicates how to access the web-based Configuration Page for your ZTE Unite



Software Update:

Select

Check for Update

to check for new software.



Button Lock:

Set the lock duration for your device by selecting on of the following options:

30Secs/15Secs/Never



Sound Alert:

Mute or unmute the system alert.

Text Message

Select

using the

and

DOWN

buttons

and press the

OK button

to check messages. Select one

of the following options:

New Messages:

Displays your unread messages.

Inbox:

Displays already read messages in your inbox.

Rate

Popular ZTE Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share