ZTE Unite US Cellular Router Manual PDF (Setup & Configuration Guide)

Page 6 / 29 Scroll up to view Page 1 - 5

5

Getting Started

The following figure shows the appearance of your ZTE Unite, it is only for your reference. The actual

device may be different.

BUTTONS AND INTERFACE

DESCRIPTION

1. SCREEN

Displays the menus and the status of your ZTE

Unite.

2. UP BUTTON

Scroll up to select the options.

3. DOWN BUTTON

Scroll down to select the options.

4. OK BUTTON



Confirm the highlighted selection.



When the ZTE Unite button is locked, press

once to light up the screen, and press again

to unlock.

5. POWER SWITCH

Power on/off your ZTE Unite.

6. MICRO USB PORT

Charge your ZTE Unite.

7. RESET BUTTON

Press and hold to restore your ZTE Unite to the

factory default settings.

Screen Indicators

Icon

Description

Icon

Description

Battery Status

4G Network

3G Network

CDMA 1X Network

Data Connected

Signal Strength

Roaming Signal Strength

Roaming

No SIM Card Inserted

PIN enabled SIM card or

Incorrect SIM card inserted

and

No Network Service

Number of current

Wi-Fi connections

Text Message

New Text Message

Text Message Full

Settings

5

1

2

4

3

6

7

Page 7 / 29

6

Hardware Installation

Installing the 4G LTE SIM Card

If you have not already done so, please follow these instructions for the installation of your new SIM card

which is in the package:

1. Remove the SIM card from the outer card, being careful not to touch the gold contacts.

2. Turn the power off. Remove the battery cover and take the battery out. Locate the SIM card slot. Hold

the card so the writing on the back of the card is facing you and the gold contact points are properly

aligned with the SIM card slot.

3.

Insert the SIM card into the slot until it is fully inserted.

NOTES:



The SIM card MUST remain in your ZTE Unite when in use. Once the SIM card has been inserted into

the ZTE Unite, do not remove!



Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt.



If your SIM card is separated from the ZTE Unite

or damaged, your ZTE Unite will not work. If you

encounter any issue with your ZTE Unite, contact Customer Service at 1-888-944-9400 or visit your

nearest U.S. Cellular

®

Inserting and Charging the Battery

retail location.

1.

Use the thumb catch at the bottom of your ZTE Unite to open the battery cover and align the battery

contacts with the terminals in the battery compartment as shown. Push the battery down until it clicks

into place.

2. Place the battery cover over the battery compartment and press it downward until it clicks into place.

Page 8 / 29

7

3. Your ZTE Unite comes with wall charger. To charge:

Plug one end of the wall charger into an electrical

outlet and the the other end into the ZTE Unite’s

MICRO USB PORT

.

NOTE

: The charge time varies depending upon the battery level. The device will stop charging if the

temperature of the battery exceeds 113 °F/45 °C.

Removing the 4G LTE SIM Card

1. Turn the power off. Remove the battery cover and take out the battery.

2. Gently remove the SIM card from the SIM card slot.

Page 9 / 29

8

Connecting to the Internet

With your ZTE Unite, a wireless Internet connection can always be at your fingertips.

Connecting Wi-Fi Enabled Devices To Your ZTE Unite

NOTE

: It is recommended the battery be fully charged in order to use your ZTE Unite via Wi-Fi for the first

time, or connect the device to the wall adapter for power.

The following should occur once you power on your ZTE Unite:



Your ZTE Unite is powered on as soon as you slide the

Power Switch

to

On

and the display lights up.



Once your ZTE Unite is powered on and has been activated, it automatically connects to the Internet

provided that Mobile Broadband service is available and one or more Wi-Fi devices are connected.



The Service (4G LTE, 3G, and 1X), Signal Strength

, and Data Connected

icons on your ZTE

Unite indicate it is in service and ready to connect.

Follow these Steps

:

1. Use your normal Wi-Fi application on your computer to establish a connection to your ZTE Unite.

2. Look for the network (SSID) named “

USCC-EuFi891-XXXX

”.

XXXX

varies from device to device.

3. Click

Connect

and enter the default password printed beside the battery compartment of your ZTE

Unite.

NOTE:

Your password will also be displayed on the ZTE Unite screen each time the ZTE Unite is powered

on.

Accessing the Internet

After successfully establishing the connection between your ZTE Unite and Wi-Fi clients, you can access

the Internet in the

Auto Connect

,

Manual Connect

mode. The default mode is

Auto Connect

.

Page 10 / 29

9

Advanced Configuration

1. Make sure your computer is connected to the ZTE Unite.

2. Launch the Internet Browser and enter

http://uscc.hotspot

or

http://192.168.1.1

in the address bar.

NOTE:

It is recommended that you use IE (7.0 or later), Firefox (3.0 or later), Opera (10.0 or later), Safari

(4.0 or later) or Chrome (10.0 or later).

3. The login page appears as follow:

Input the default password which is printed beside the battery compartment of your ZTE Unite, and then

click

Login

to access the Web User Interface.

NOTE:

Do not put anything on the top of your ZTE Unite. Do not lay devices to overlap each other when

using.The ZTE Unite takes 1~2 minutes to initialize, and attach to the network.

Basic Setup

After logging in, select

Basic Setup > Quick Setup

to configure the Wi-Fi settings, including

Wi-Fi

Network Name

,

Wi-Fi Securiy Policy

and

Sleep Time

.

Rate

Popular ZTE Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share