Page 11 / 28
Scroll up to view Page 6 - 10
11
4.
Input the password, and then click
Connect
.
NOTE:
You may need to input the password for Wi-Fi
connection. Please check the label underneath the back
cover of your device to get the default password.
5.
Wait a moment, and then the client will connect to
your device successfully.
Page 12 / 28
12
Via USB Cable
1. Connect the device to your PC or Mac with a USB
cable.
2. Power on your device.
3. Your computer detects and recognizes new hardware
and finishes the installation automatically.
NOTE:
If the system does not launch installation
automatically, you can run the installation program in
path of
My Computer > O2MobileWifi
.
4. Wait a moment, and then the client will connect to
your device successfully.
Accessing the Internet
O2 Mobile Broadband Manager
Once you are connected to the device you can open a
browser and access the O2 Mobile Broadband Manager
The default
password is “admin”.
Please refer to the O2 leaflet in the box to see how to use
your O2 Mobile Broadband.
Page 13 / 28
13
3G Mode
After the client connected to your device successfully,
you can access the Internet in the
Automatic
or
Manual
mode. The default mode is
Automatic
.
Mode
Operations
Automatic
Your device will connect to the Internet au
-
tomatically, and your clients can surf on the
Internet directly.
Manual
Your device will not connect ton the internet
unless you log in to the O2 Mobile Broad
-
band Manager and click on “connect”.
Log in the O2 Mobile Broadband settings
page, and select
Settings > Network Set-
tings > Network Selection > Manual
(To
change current setting, please disconnect
from network), then
Apply
.
NOTE:
If you want to modify the settings of your device, please
log in the O2 Mobile Broadband manager settings page
default password is
admin
.
Page 14 / 28
14
Internet Wi-Fi Mode
1.
Log in the O2 Mobile Broadband Manager go to the
settings page.
2. Select
Settings > Internet Wi-Fi
.
3. Choose enable next to
Internet Wi-Fi Switch
and
select Wi-Fi as your Preferred Network
, and then
click
Apply
.
NOTE:
You need to enable Internet Wi-Fi switch and select pre
-
ferred network Wi-Fi.
4.
Connect to the Wi-Fi device.
Input the Wi-Fi device information in the
Wi-Fi Setting
area, and then click
Apply
.
NOTE:
Click
for more help.
Page 15 / 28
15
5.
After the client connected to the Wi-Fi device suc
-
cessfully, you can access the Internet.
Configuring Your PC
Follow the following steps and figures for Windows XP to
configure the Internet Protocol for your Wi-Fi connection.
19216811.live