Page 31 / 108
Scroll up to view Page 26 - 30
Figure 8. Example of Diagnostics - Traceroute Page
To run either utility:
1
Select the utility from the Utility drop-down list.
2
Make any changes to the default parameters.
3
Select
Start Test
to begin. The window will automatically be refreshed as the results are displayed
in the Results table.
31
Page 32 / 108
Table 4. Diagnostics Menu Option
Option
Description
Utility
Select the utility for troubleshooting.
Parameters
Enter the required parameters to perform diagnostics.
Start Test
Click this button to begin diagnostic after making any changes to the default
parameters.
Abort Test
Click this button to abort Ping diagnostics.
Clear Results
Click this button to clear the results table.
Event Log
The Event Log page shows the SNMP event log.
To access the Event Log page, click
Status
in the menu bar and then click the
Event Log
submenu.
Figure 9 shows an example of the menu and Table 5 describes the items you can select.
Figure 9. Event Log Page
Table 5. Event Log Menu Option
Option
Description
Time
Shows the local time of a log event.
Priority
Shows the priority level of an event.
Description
Shows detailed information of an SNMP event.
32
Page 33 / 108
4
Basic Menu Options
The Basic Menu lets you:
¾
Configure the basic settings of your cable modem/router
¾
Configure DHCP server for the LAN
¾
Configure DDNS service
¾
Backup and restore of configuration settings
Setup
The Setup page allows you to configure the basic features of the cable modem/router related to your
ISP’s connection.
To access the Setup page, click
Basic
in the menu bar and then click the
Setup
submenu. Figure 10
shows an example of the menu and Table 6 describes the items you can select.
33
Page 34 / 108
Figure 10. Example of Setup Page
Table 6. Setup Menu Option
Option
Description
LAN IP Address
Set the base LAN IP for your private network. By default this is
192.168.0.1 There is normally no need to change this.
WAN
Connection Type
Select how your cable modem/router obtains an IP address. The options are
via DHCP or manual configuration of a static IP address. Unless you have
arranged for a static IP address from your service provider, you should leave
this setting at its default, DHCP.
34
Page 35 / 108
DHCP
The DHCP page allows you to configure your cable modem/router’s DHCP server.
To access the
DHCP
page:
1
Click
Basic
in the menu bar.
2
Then click the
DHCP
submenu.
Figure 11 shows an example of the menu and Table 7 describes the items you can select.
Figure 11. Example of DHCP Page
35
19216811.live