1. Home
  2. /
  3. Manuals
  4. /
  5. Zoom
  6. /
  7. 4402
  8. /
  9. 11
Page 51 / 108 Scroll up to view Page 46 - 50
Figure 20. Example of DMZ Host Page
To configure DMZ settings:
1
Enter the last byte of the LAN IP address of the PC or other device on your network that you
want to configure as a DMZ host.
2
Click
Apply
.
Note:
If a specific PC is set as a DMZ Host, remember to set this back to “0” when finished with
the needed application, since this PC will be effectively exposed to the public Internet.
Note:
You may need to assign your DMZ host a static IP address on your LAN to insure that it
will always be at that address.
RIP Setup
The RIP Setup page allows you to configure RIP (Router Information Protocol) parameters. RIP
automatically identifies and uses the best known and quickest route to any given destination address
to help reduce network congestion and delays.
RIP is a protocol that requires negotiation from both sides of the network (e.g. both the cable
modem/router and your service provider’s CMTS (Cable Modem Termination System)). Your
service provider will normally set this up based on their knowledge of their CMTS settings.
To access the
RIP Setup
page:
1
Click
Advanced
in the menu bar.
2
Then click the
RIP Setup
submenu.
Figure 21 shows an example of the menu and Table 15 describes the items you can select.
51
Page 52 / 108
Figure 21. Example of RIP Setup Page
Note:
RIP messages will only be sent when the cable modem/router is configured for Static IP Addressing
(see the
Basic – Setup
page).
It is unlikely that your cable Internet service supports this mode. If they do, and you want to enable
RIP, you will need to ask for the CMTS’s key name and number. You may need additional
information.
To enable the cable modem/router to perform RIP, do the following (this example uses BRCMV2 as
the RIP Authentication Key and 1 as the Key ID):
To turn on RIP MD5 Authentication, and check the
Enable
box.
To specify a RIP MD5 Authentication Key String, type
BRCMV2
for this example.
key name = a string value to match CMTS key name value
To specify a RIP MD5 Auth Key ID, type
1
.
key number = a number to match the CMTS key number value
To change the RIP announcement interval, enter a number in seconds.
reporting interval by default = 30 seconds
To specify a RIP unicast destination IP address, enter the IP address and subnet mask.
52
Page 53 / 108
Table 15. RIP Setup Menu Option
Option
Description
RIP Authentication
Check this box to enable RIP authentication for routing
protocols
RIP Authentication Key
Enter the set of keys for your interface.
RIP Authentication Key ID
Enter the ID to identify the key used to create the
authentication data.
RIP Reporting Interval
Enter the interval at which to update routing table.
RIP Destination IP Address
Enter the destination IP address for RIP.
RIP Destination IP Subnet Mask
Enter the subnet mask for the destination IP address.
53
Page 54 / 108
6
Firewall Menu Options
The Firewall Menu lets you:
¾
Configure web contents filter
¾
View the local and remote logs
Web Filter
The Web Filter page allows you to block or exclusively permit different types of data through the
cable modem/router from the WAN to the LAN.
To access the
Web Filter
page:
1
Click
Firewall
in the menu bar.
2
Then click the
Web Filter
submenu.
Figure 22 shows an example of the menu and Table 16 describes the items you can select.
54
Page 55 / 108
Figure 22. Example of Web Filter Page
To enable web content filter:
1
Click the appropriate check box. A check-mark will appear.
2
When you are done with your selections, click on the
Apply
button.
Table 16. Web Filter Menu Option
Option
Description
Filter Proxy
Check this box to filter proxies.
Filter cookies
Check this box to filter cookies.
Filter Java
Check this box to filter Javas.
Applets
Check this box to filter Applets.
Filter ActiveX
Check this box to filter ActiveX.
Filter Popup Windows
Check this box to filter popup windows.
Port Scan Detection
Detects and blocks port scan activity originating on both
the LAN and WAN.
55

Rate

4 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top