Page 11 / 54
Scroll up to view Page 6 - 10
7
3. Select
Internet Protocol (TCP/IP)
and click
Properties
.
4. Select
Obtain an IP address automatically
and
Obtain DNS server
address automatically
. Click
OK
to save the configurations.
Page 12 / 54
8
5. Or select
Use the following IP address
and enter the IP address, Subnet
mask, Default gateway. Of course, you need to input the DNS server address
provided by your ISP. Otherwise, you can use the ZSR4154WE’s default
gateway as the DNS proxy server. Click
OK
to save the configurations.
Page 13 / 54
9
How to Check the Network Connection
1. Select
Start
→
Programs
→
Accessories
→
Command Prompt
.
2. Input
and press
Enter
. If the screen displays as below, it
means your PC is connected to your router successfully.
If not, please make sure the hardware installation and network adapter are
OK.
Page 14 / 54
10
Chapter 4 Basic Configurations
This section is to show you how to configure your new ZSR4154WE through the
Web-based Configuration Utility.
How to Access the Web-based Configuration Utility
1. After your computer obtained an IP address from ZSR4154WE, please start
your web browser, and input the default IP address of ZSR4154WE
in address bar.
2. Please input user name and password and then click
OK
.
Both default user name and password is
admin
.
Page 15 / 54
11
Setup Wizard
1. When
Welcome to Setup Wizard
pop out, Click
Next
to continue.
2. Select one Internet connection type you’re using. If you’re not sure, click
Detect
or contact your Internet Service Provider.
Click
Next
.
19216811.live