Page 6 / 54
Scroll up to view Page 1 - 5
2
Getting to Know Your ZSR4154WE
Top Panel
LED Indicator
Status
Description
POWER
ON
ZSR4154WE is switched on and correctly powered
SYS
Flashing
Indicates the system works normally.
ON
Indicates WAN port is connected
WAN
Flashing
Indicates WAN activity (transferring or receiving
data)
WLAN
Flashing
Indicates the wireless signal is OK.
ON
Indicates LAN port is connected
LAN(1/2/3/4)
Flashing
Indicates LAN activity (transferring or receiving
data)
WPS
Flashing
Indicates ZSR4154WE is negotiating with WPS
clients in WPS Mode (PBC or PIN).
Page 7 / 54
3
Rear Panel
Item Name
Description
POWER
Power connector, connects to power adapter
WAN
Wide Area Network (WAN / Internet) port.
1-4 (LAN Ports)
Local Area Network (LAN) ports 1 to 4
RESET
Reset ZSR4154WE to factory default settings (clear all
settings). Press this button and hold for 7 seconds to
restore all settings to factory defaults.
WPS
Start WPS function. Press this button for 1 second to start
WPS function.
Antenna
The antenna is 3dBi dipole antenna.
Page 8 / 54
4
Chapter 2 Hardware Installation
Please follow the following instruction to build the network connection between
your ZSR4154WE and your computers, network devices:
1.
Connect the A/C power adapter to the wall socket, and then connect it to the
Power
socket of ZSR4154WE.
2.
Connect all your computers, network devices (network-enabled consumer devices
other than computers, like game console, or switch / hub) to the
LAN
port of
ZSR4154WE.
Page 9 / 54
5
3.
Connect your xDSL / cable modem to the
WAN
port of ZSR4154WE by Ethernet
cable.
4.
Please check all LEDs on the top panel. POWER LED should be steadily on, WAN and
LAN LEDs should be on if the computer / network device connected to the
respective port of ZSR4154WE is powered on and correctly connected. If any LED
you expected is not on, please recheck the cabling, or jump to
“Troubleshooting”
for possible reasons and solution.
Page 10 / 54
6
Chapter 3 Connect Your ZSR4154WE
How to Set the Network Configurations for My Computer
1. Right click
My Network Places
and select
Properties
2. Right click
Local Area Network Connection
and select
Properties
.
19216811.live