Page

44

I.

A.

Netscape

Step 1.

Launch Netscape Navigator and click the

Stop

button. Go through the path “Edit

→

Preferences...”

Step 2.

In Category, find

Proxies

under the

advanced

item.

Step 3.

Check

direct connection to the Internet

and click the

OK

button.

A.2 Verify IP Settings

Verify IP settings in your client computer to make sure the network is working and learn your client

PC’s LAN IP address and your ZSR0104C SERIES Router’s IP address. This section is divided into

5 parts, including “Verify IP Settings for Windows 95/98/ME,” “Verify IP Settings for Windows

2000/NT 4.0,” and “Verify IP Settings for Windows XP,” “Verify IP Settings for Mac,” and “Verify

IP Settings for Unix/Linux.”

1. For Windows 95 / 98 / ME

If you use Windows 95, 98, or ME, follow the steps to verify the IP settings in your client PC. The

steps and screenshots here are based on Windows 98. It is similar to the other Windows Operating

Systems.

Step 1.

Go through the path “Start

→

Run.”(Figure A-33)

Figure A–33

Downloaded from

www.Manualslib.com

manuals search engine

Page

45

Step 2.

Run the

WINIPCFG

command. (Figure A-34)

Figure A–34

Step 3.

To release the previous IP settings in your computer, choose your network interface card

in the menu. Then click the

Release

button. (Figure A-35)

Figure A–35

Step 4.

To obtain new IP settings from WPD –140, click the

Renew

button. As listed below, the

IP address is your client computer’s LAN IP address, and the Default Gateway is

ZSR0104C SERIES IP address. Make sure that your IP Address is 10.0.0.xxx, (xxx ranges

from 2 to 254) your Subnet Mask is 255.0.0.0, and your Default Gateway is 192.168.1.1.

These values confirm that your ZSR0104C SERIES is functioning.

(Figure A-36)

Figure A–36

Downloaded from

www.Manualslib.com

manuals search engine

Page

46

2. For Windows 2000 /NT

If you use Windows 2000 or NT, follow the steps to verify the IP settings in your client PC. The

steps and screenshots here are based on Windows 2000. It is similar to the other Windows

Operating System.

Step 1.

Go through the path “Start

→

Run.”(Figure A-37)

Figure A–37

Step 2.

Please enter

command

and press the

OK

button. (Figure A-38)

Figure A–38

Downloaded from

www.Manualslib.com

manuals search engine

Page

47

Step 3.

To release the previous IP settings in your computer, run the command “

ipconfig /

release

.” (Figure A-39)

Figure A–39

Step 4.

To obtain new IP settings from WPD –140, run “

ipconfig / renew

.” As listed below, the

IP address is your client computer’s LAN IP address, and the Default Gateway is

ZSR0104C SERIES IP address. Make sure that your IP Address is 192.168.1.xxx (xxx

ranges from 2 to 254), your Subnet Mask is 255.255.255.0, and your Default Gateway is

192.168.1.1. These values confirm that your ZSR0104C SERIES is functioning. (Figure

A-40)

Figure A–40

Downloaded from

www.Manualslib.com

manuals search engine

Page

48

3. For Windows XP

If you use Windows XP, follow the steps to verify the IP settings in your client computer.

Step 1.

Go through the path “Start

→

Run.”(Figure A-41)

Figure A–41

Step 2.

Enter

command

and press the

OK

button. (Figure A-42)

Figure A–42

Step 3.

To release the previous IP settings in your computer, run the command “

ipconfig /

release

.” (Figure A-43)

Figure A–43

Downloaded from

www.Manualslib.com

manuals search engine