Page 6 / 58 Scroll up to view Page 1 - 5
About This Guide
6
zNID Hardware Installation Guide
WARNING!
A warning alerts users to conditions or actions that
could lead to injury caused by a laser.
AVERTISSEMENT
! Un avertissement avertit les utilisateurs au
sujet d'états ou d'actions qui pourraient entraîner des blessures
causées par un laser.
WARNING!
This icon warns the user that metal surfaces can
become hot to touch. Avoid contact or use caution when touching
these surfaces.
AVERTISSEMENT
! Cette icône prévient l'utilisateur que les
surfaces métalliques peuvent devenir chaudes au toucher. Evitez
le contact ou soyez prudent lorsque vous touchez ces surfaces.
Typographical conventions
The following typographical styles are used in this guide to represent specific
types of information.
Bold
Used for names of buttons, dialog boxes, icons, menus,
profiles when placed in body text, and property pages (or
sheets). Also used for commands, options, parameters in
body text, and user input in body text.
Fixed
Used in code examples for computer output, file names, path
names, and the contents of online files or directories.
Fixed Bold
Used in code examples for text typed by users.
Fixed Bold
Italic
Used in code examples for variable text typed by users.
Italic
Used for book titles, chapter titles, file path names, notes in
body text requiring special attention, section titles,
emphasized terms, and variables.
PLAIN UPPER
CASE
Used for environment variables.
Page 7 / 58
Related documentation
zNID Hardware Installation Guide
7
Related documentation
Refer to the following publication for additional information:
zNID Quick Installation Instructions for the zNID you are installing.
These instructions are shipped with the zNID, but are also available on
the Zhone website.
zNID 24xx Configuration Guide
— explains how to use the zNID web
interface and describes the system commands and parameters.
Refer to the release notes for software installation information and for
changes in features and functionality of the product (if any).
Acronyms
The following acronyms are related to Zhone products and may appear
throughout this manual:
Table 1:
Acronyms and their descriptions
Acronym
Description
Active E
Active Ethernet, also known as Gigabit Ethernet
APC
Angled physical contact (for fiber connector)
Coax
Coaxial cable
CNI
Comfort Noise Insertion
CPE
Consumer Premises Equipment
DHCP server
Dynamic host configuration protocol server
EZ touch™
Zhone’s implementation for managing CPEs and zNIDs
GigE
Gigabit Ethernet
GPON
Gigabit passive optical network
HPNA
Home phone line networking alliance
IPTV
Internet protocol TV
LED
Light-emitting diode
MALC
Multi-access line concentrator
MDU
Multiple Dwelling Unit
MIB
Management information bases
MoCA
Multimedia over Coax Alliance
OLT
Optical Line Terminator
ONT
Optical Network Terminator
Page 8 / 58
About This Guide
8
zNID Hardware Installation Guide
Contacting Global Service and Support
Support for this product is provided by your Internet service provider
ONU
Optical Network Unit
PoE
Power over Ethernet
PPPoE
Point-to-point protocol over Ethernet
QoS
Quality of service
RF
Radio Frequency
RFoG
Radio Frequency over Glass
SC adaptor
Subscriber connector adaptor
SIP
Session initiation protocol
SNMP
Simple network management protocol
T1/E1
T1 is Trunk line 1 (or DS 1, digital signal level 1). E1 is the
European equivalent, though there are a number of differences
between the North American T1 and the European E1.
UPC
Ultra physical contact (for fiber connector)
Wi-Fi
Wireless local area network (trademark of Wi-Fi alliance)
VAD
Voice Activity Detection
VOIP
Voice over IP
zNID
Zhone Network Interface Device
ZMS
Zhone Management System
Table 1:
Acronyms and their descriptions (Continued)
Acronym
Description
Page 9 / 58
FCC Statement
zNID Hardware Installation Guide
9
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Déclaration FCC
Ce matériel a été testé et il a été conclu qu'il est conforme aux limites
imposées aux appareils numériques de Classe B, conformément à la Partie 15
des Règles FCC. Ces limites sont établies pour fournir une protection
raisonnable contre les interférences nuisibles dans une installation
résidentielle. Ce matériel génère, utilise et peut irradier de l'énergie de
fréquence radio et s'il n'est pas installé en conformité avec les instructions, il
pourrait provoquer des interférences nuisibles avec les communications radio.
Toutefois, il n'y a pas de garantie que des interférences ne se produiront
jamais dans aucune installation. Si ce matériel provoque des interférences
nuisibles à la réception de radio ou de télévision, ce qui peut être déterminé en
éteignant et en rallumant l'appareil, nous recommandons à l'utilisateur
d'essayer de corriger l'interférence via l'une des solutions suivantes :
Réorienter ou déplacer l'antenne de réception.
Augmenter l'écart entre l'appareil et le récepteur.
Raccorder l'appareil à une prise sur un circuit différent de celui sur lequel
le récepteur est connecté.
Page 10 / 58
About This Guide
10
zNID Hardware Installation Guide
Consulter le détaillant ou un technicien de radio/télévision pour obtenir de
l'aide.
Précaution FCC
: Tous les changements ou modifications non
expressément approuvés par la partie responsable de la conformité pourraient
rendre nul le droit d'usage de l'appareil par l'utilisateur.
Ce dispositif est conforme à la Partie 15 des Règles FCC. L'utilisation est
sujette aux deux condition suivantes : (1) cet appareil ne doit pas causer
d'interférences nuisibles, et (2) cet appareil doit accepter toute interférence
reçue, y compris des interférences pouvant provoquer un fonctionnement
indésirable.

Rate

4 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top