Page 56 / 117
Scroll up to view Page 51 - 55
15xx-A1 Family Router Users Guide
56
WAN Interfaces
: defines the WAN interface for this filter.
This drop down list will show all
the available WAN interfaces.
Click
Save/Apply
to save the MAC filter.
When you
Save / Apply
the IP filter, the
MAC Filtering Setup
screen appears. The
MAC
Filtering Setup
screen lists the MAC filters, including filters which were added from the previous
screen.
You can view, add or delete MAC filters. The
Remove
button appears only when you have an
existing IP filter already set up.
Page 57 / 117
15xx-A1 Family Router Users Guide
57
Parental Control
Use the Parental Control feature to restrict the days and times a particular device is allowed to
access the Internet.
Time Restriction
To setup parental controls:
1.
Click
Add
to set up the restrictions.
The
Add Parental Control
screen appears.
Page 58 / 117
15xx-A1 Family Router Users Guide
58
2.
Enter a
User Name
to identify the target of the restrictions. .
This is equivalent to the host
name of the IP clients (refer to the
DHCP status
screen check to see the host names)
3.
Enter the MAC address of the network adapter to be restricted, and, optionally, another MAC
address.
4.
Select the days of the week the restriction is in force.
5.
Specify the start and end times the restriction is in force. Use the form hh:mm, where 23:59,
for example, is one minute before midnight.
6.
Click
Save / Apply
to save the settings and to continue.
URL Filter
Access to websites can be blocked by creating a URL filter. Two types of lists can be created,
either an exclude or include list.
1.
Select the
Exclude
button or
Include
button to specify the web sites you want to block or
allow access.
2.
Click
Add
to continue to the next screen to enter the URL address.
Page 59 / 117
15xx-A1 Family Router Users Guide
59
3.
In
URL Address
enter the URL address; in
Port Number
enter the port number and click
Save / Apply
.
If no port number is entered, the default 80 port will be applied. Continue this process until all
the necessary websites are entered.
Page 60 / 117
15xx-A1 Family Router Users Guide
60
Quality of Service
You can configure the Quality of Service to apply different priorities to traffic on the router.
Queue Config
In the
QoS -- Queue Management Configuration
page you can enable a queue for a network
interface. Each interface associated with QoS is allocated three queues. Lower Queue
Precedence values denote a higher priority for the queue, so ―1‖ has higher priority than ―2.‖
To enable QoS:
1.
From the
Quality of Services
page, check
Enable QoS
.
2.
From the
Select Default DSCP Mark
drop down select the option as directed by your ISP.
Differentiated Services Code Point (DSCP) is a means to classify packets in the IP header of
the packet.
To associate an interface with QoS:
19216811.live