Page 46 / 117
Scroll up to view Page 41 - 45
15xx-A1 Family Router Users Guide
46
NAT
You can configure Virtual Servers, Port Triggering, and DMZ Host when NAT (Network Address
Translation) is enabled.
Virtual Servers
A virtual server allows you to direct incoming traffic from the WAN side to a specific IP address on
the LAN side. The following figure shows the screen that allows you to configure your virtual
server(s).
To direct incoming traffic from a service (or other server):
1.
Click
Add
to configure a virtual server.
2.
Either select a service (by using the
Select a Service
dropdown) or select a custom server
(by entering the IP address of the server in the
Custom Server
text box).
Page 47 / 117
15xx-A1 Family Router Users Guide
47
You can select a Service or make a new one.
Page 48 / 117
15xx-A1 Family Router Users Guide
48
3.
Enter the IP address of the LAN side PC in the
Server IP Address
text box.
4.
Click
Save / Apply
to submit the configuration.
The
NAT
–
Virtual Servers Setup
screen appears after you save your selection. To add
additional virtual servers, click
Add
. If you need to remove any of the server names, select
the check box for the item and click
Remove
.
Page 49 / 117
15xx-A1 Family Router Users Guide
49
Port Triggering
Click
Add
to add Port Triggering to your Internet application.
The
NAT
–
Port Triggering
screen appears when you click
Add
allowing you to select the
application that you want to set the port settings for. After a selection has been made, click
Save /
Apply
to save your settings.
The
NAT
–
Port Triggering Setup
screen appears after you save your selections. You will be
able to add or remove selections made by clicking on the
Add
and
Remove
buttons.
Page 50 / 117
15xx-A1 Family Router Users Guide
50
DMZ Host
You can define the IP address of the DMZ Host on this screen. Enter the IP address and click
Save / Apply
.
19216811.live