030-300554 Rev. A

81

June 2008

Verizon FiOS Router (Model 9100EM)

User Guide

12.2.3.1

Configure Connection —Broadband Connection Coax

To configure the Router’s Coax settings, click

Configure Connection

in the left submenu. The following screen

appears. Enter the desired settings for your broadband connection (coax), and then click

Apply

to save the settings.

030-300554 Rev. A

82

June 2008

Verizon FiOS Router (Model 9100EM)

User Guide

View Broadband Connection (Coax) Node Detailed Stats

If you click the

View Broadband Connection (Coax) Node Detailed Stats

link in the

Configure Broadband

Connection (Coax)

screen, the following screen appears. View the information in this screen, and then click

Close

to return to the

Configure Broadband Connection (Coax)

screen.

NOTE: This screen is only intended for use by Verizon technicians.

Any errors indicated do not necessarily

indicate a problem with your service.

030-300554 Rev. A

83

June 2008

Verizon FiOS Router (Model 9100EM)

User Guide

Go to Broadband Connection (Coax) Stats

If you click the

Go to Broadband Connection (Coax) Stats

link in the

Configure Broadband Connection (Coax)

screen, the following screen appears. View the information in this screen, and then click

Close

to return to the

Configure Broadband Connection (Coax)

screen.

12.2.3.2

QoS—Broadband Connection Coax

NOTE: This section is only intended to be modified by a Verizon technician. Any changes to this section may

result in a disruption of service.

If you select

QoS

in the left submenu of the

Broadband Connection (Coax)

Properties

screen, the following

screen appears.

030-300554 Rev. A

84

June 2008

Verizon FiOS Router (Model 9100EM)

User Guide

You may use this section to remove VLAN tags to your incoming (Ingress) packets, or allow specific tagged packets

to enter.

To add a new entry, click the

New Entry

link. The following screen appears. Enter the desired port in the

VLAN ID

in the field, and then select an Egress Policy from the drop-down list. Click

OK

.

The following screen appears. The VLAN ID displays the port that you added. Click

Apply

to save the settings.

For outgoing (Egress) packets you may enable a

Rate Limit

by checking the rate limit check box, and you may also

enable the pass through of standard QoS classifiers.

These are 802.1p, DSCP, and port tags.

Note that any

changes to your egress setting will likely result in a disruption of your FiOS service.

030-300554 Rev. A

85

June 2008

Verizon FiOS Router (Model 9100EM)

User Guide

12.2.3.3

Advanced—Broadband Connection Coax

If you select

Advanced

in the left submenu of the

Broadband Connection (Coax) Properties

screen, the following

screen appears.

To add a new IP address, click the

New IP Address

link.

The following screen appear. Enter the desired IP Address and Subnet Mask in the fields provided. Then, click

Apply

to allow the settings to take effect.

The entry will be added to the list of broadband connection IP addresses.