Page 71 / 210
Scroll up to view Page 66 - 70
030-300554 Rev. A
71
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
Configure Connection (Coax)
If you select
Configure Connection
from the left submenu, the following screen will appear. In this screen, you can
do any of the following:
•
Enter the desired properties for the coax connection, and then click
Apply
to save the settings.
•
Click the
View Coax Node Detailed Stats
link to view the Coax
statistics page
•
Click the
Go to Coax Stat
link to view the coax statistics
Page 72 / 210
030-300554 Rev. A
72
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
View Coax Node Detailed Stats
If you clicked the
View Coax Node Detailed Stats
link in the
Configure Coax
screen, the following screen
appears. This screen displays information on the Router’s MoCA stats.
Go to Coax Stats
If you clicked the
Go to Coax Stats
link in the
Configure Coax
screen, the following screen appears. This screen
displays the Tx/Rx rate between the Router and other devices or nodes in a MoCA network. View the information in
this screen, and then click
Close
to return to the
Configure Coax
screen.
Page 73 / 210
030-300554 Rev. A
73
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
12.2.1.3
Wireless 802.11g Access Point
To view the wireless access properties, in the
Network (Home/Office) Properties
screen, click the
Wireless
802.11g Access Point
link.
The following screen will appear. View the wireless properties in this screen. If you change the connection name,
click
Apply
to save the changes. Then, click
OK
to return to the
Network Connections
screen.
Page 74 / 210
030-300554 Rev. A
74
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
Configure Connection—Wireless Access Point
If you select
Configure Connection
from the left submenu, the following screen will appear. Configure your
wireless access point properties, and then click
Apply
to save the settings.
Please refer to section 11, “Wireless,” for details on the following wireless features listed in the left submenu of this
screen.
•
Wireless Status
•
Basic Security Settings
•
Advanced Security Settings
•
Device List
•
Advanced
12.2.1.4
IP Address Distribution
If you click the
IP Address Distribution
link in the
Network (Home/Office) Properties
screen, the following
screen appears. This screen allows you to access your Router’s DHCP settings. See section for details on DHCP
settings.
Page 75 / 210
030-300554 Rev. A
75
June 2008
Verizon FiOS Router (Model 9100EM)
User Guide
12.2.2
Broadband Connection (Ethernet)
The Router’s Broadband Connection describes the hardware used to connect the Router to the Internet. A Broadband
Ethernet connection connects the Router to the Internet using an Ethernet cable. By default Broadband Connection
Ethernet is Disabled. However, you can use the Ethernet port labeled
WAN
on the back of the Router to connect
your Router to the Internet. In this setup, you will install the Router so that it connects (via Ethernet) to another
Internet device that provides WAN access. If you use the Router’s
WAN
port, you will also need to change the
Router’s network connection settings.
To change the Router’s network connection settings, in the
Network Connections
screen, click the
Broadband
Connection (Ethernet)
link.
The following screen appears. View the connection setting properties in this screen. If you change the connection
name, click
Apply
to save the changes.
19216811.live