Page 21 / 47
Scroll up to view Page 16 - 20
•
Model Name
: The model name of this MODEM.
•
Software Version
: Current software version of this MODEM.
•
Hardware Version
: Current hardware version of this MODEM.
•
Uptime
: The running elapsed of the MODEM.
•
MAC Address
: The Mac Address of the MODEM.
Setup
IP Configuration
After access MODEM setup page successfully, please click
Setup > IP Configuration
link to access the
following screen:
•
IP Address
: IP address for LAN
•
NetMask
: Net mask for LAN
•
Enable DHCP
: Enable or disable the DHCP service, when this item is checked, you should set DHCP
server information as follows
•
Start IP
: First IP assigned by DHCP server
Page 22 / 47
•
Max User
: The max number assigned by DHCP server
•
NetMask
: Net mask assigned by DHCP server
•
WINS Server
: IP for WINS server
•
Lease Time
: Time that DHCP server rents the IP address (Unit: day)
button use to active the IP configuration.
DHCP Clients
After access MODEM setup page successfully, please click
Setup > DHCP Clients
link to access the
following screen:
•
MAC Address
: MAC address of DHCP client
•
IP Address
: IP address for DHCP clients
•
Expires in
: The left time for lease, if this IP address is static bound, then demonstrated: Infinity
DHCP Binding
After access MODEM setup page successfully, please click
Setup > DHCP Binding
link to access the
following screen:
Page 23 / 47
You can set MAC address and IP address binding, create a DHCP binding table to mapping MAC address
and IP address of clients. When DHCP server assigns address, IP address will be assigned according to
the binding relations of MAC and IP, and never expired.
For example: MAC address is 00-0a-e2-c6-48-ba; and IP address is
192.168.1.133, it means that the IP
address DHCP Server assigns to the MAC address corresponding host is
192.168.1.133.
WLAN
Basic Settings
After access MODEM setup page successfully, please click
WLAN > Basic Settings
link to access the
following screen:
•
Enable Wireless RF
: Display the WLAN function status based on the WLAN button status On or Off.
•
Mode
: Use to select default wireless mode.
•
Channel
: Use to configure default wireless channel.
•
SSID
: Use to configure SSID, not more than 32 characters.
•
button use to active the basic wireless configuration.
Security
After access MODEM setup page successfully, please click WLAN Security link to access the following
screen:
Page 24 / 47
•
Hide SSID
: Select the option to hide SSID of WLAN
•
Security Mode
: Use to select the security mode of WLAN
•
button use to active the wireless security configuration
WEP
WEP is a basic type of wireless encryption protocol.
•
WEP Type
: You can select the 64-bit or 128-bit, the 128-bit can provide much better security than
64-bit.
•
WEP Key Type
: You can select Alphanumeric or Hexadecimal.
•
Use WEP Type
: You can select 1~4 to use the Key1~Key4.
•
Key1~Key4
: You can set the WEP key.
•
button use to active the wireless security configuration
WPA
WPA is an advanced type of wireless encryption protocol.
Page 25 / 47
•
WPA Type
: You can select WPA or WPA2.
•
Encryption Type
: You can select TKIP or AES.
•
Group Key Renewal
: You can input 0~3600 seconds as the interval of change the key.
•
PSK Passphrase
: You can input 8~63 bytes digit as the WPA key
•
button use to active the wireless security configuration
MAC Filter
After access MODEM setup page successfully, please click
WLAN > MAC
Filter
link to access the
following screen:
Access List
•
Access Restriction
: To enable or disable the access restriction function
•
Restriction Type
: If Access Restriction enabled, you need select the restriction type
•
MAC Address Filter List
: Set up the MAC filter address
•
button use to add the new MAC address
19216811.live