Page 16 / 47
Scroll up to view Page 11 - 15
3. When you access the MODEM setup page, the first screen you see as following:
The whole interface is divided into two parts, and related functions can be executed by operation in the
related areas.
f
Function Button
– Clicking
Status
link displays status and statistical information for all connections
and interfaces.
– Clicking
Setup
link allows you to edit existing connections, and configure
other basic settings.
– Clicking
WLAN
link allows you to edit WLAN interface.
– Clicking
Advanced
link allows you to configure advanced features like SNTP,
DNS etc.
– Clicking
Security
link allows you to configure Port Forwarding, Port Trigger
etc.
– Clicking
Tools
link allows you to carry out system commands and perform
simple system tests.
– Clicking
logout
link to exit MODEM setup page manually.
f
User Area
Show the man-computer interaction information under various conditions.
Page 17 / 47
Status
Connection Status
After access MODEM setup page successfully, please click
Status > Connection Status
link to access
the following screen:
WAN Status
•
IP
: IP address for WAN connection. It is the same IP address as the WiMAX IP Address.
•
Subnet Mask
: The subnet mask address
•
Gateway
: Gateway IP address
•
NTP Server
: The NTP server name
•
DNS1
: DNS1 address
•
DNS2
: DNS2 address
•
Negotiated MTU
: Negotiated Maximum Transmission Unit
LAN Status
•
Modem IP Address
: IP address of the Modem.
•
Modem IP Subnet
: The IP Subnet of the Modem.
•
Port1 Status
: LAN port 1 property and current status
•
Port2 Status
: LAN port 2 property and current status
WLAN Status:
•
Connected Hosts IP
: The IP Address of MODEM
Page 18 / 47
•
SSID
: Service Set Identifier
•
Mac Address
: Mac Address of AP(Access Point)
•
Current Date Rate
: AP(Access Point) Current Transmit Date
•
Transmitted Channel
: AP(Access Point) Current Transmit Channel
VPN Status:
•
Tunnel 1
: status of L2TP V3
tunnel 1 connection
•
Tunnel 2
: status of L2TP V3
tunnel 2 connection
ATA Port Status:
Shows two ATA ports
information.
•
Port1 Status
: Phone 1 current status, “In Service” or “Out of Service”. “In Service” stands for
registration success, and “Out of Service” stands for registration failure.
•
Port1 Error Code
: The error code returned by SIP server for the latest SIP request started by Phone 1.
Provisional 1xx
100 Trying
180 Ringing
181 Call Is Being Forwarded
182 Queued
183 Session Progress
Successful 2xx
200 OK
Redirection 3xx
302 Moved Temporarily
Request Failure 4xx
401 Unauthorized
402 Payment Required
403 Forbidden
404 Not Found
408 Request Timeout
480 Temporarily Unavailable
481 Call/Transaction Does Not Exist
486 Busy Here
487 Request Terminated
Server Failure 5xx
500 Server Internal Error
Global Failures 6xx
600 Busy Everywhere
603 Decline
604 Does Not Exist Anywhere
606 Not Acceptable
•
Port1 Negotiated Codec
: The current code type used by the call on Phone 1. If there is no call, it will
show “No Call”.
•
Port1 Bandwidth
: The band width occupied by the call on Phone 1
•
Port1 Service Type
: Service type on Phone 1, Voice or Fax. If there is no call, it will show “No Call”.
Page 19 / 47
•
Port2 Status
: Phone 2 current status: “In Service” or “Out of Service”. “In Service” stands for
registration success, and “Out of Service” stands for registration failure.
•
Port2 Error Code
: The error code returned by SIP server for the latest SIP request started by Phone 2.
•
Port2 Negotiated Codec
: The current code type used by Phone 2. If there is no call, it will show “No
Call”.
•
Port2 Bandwidth
: The band width occupied by the call on Phone 1.
•
Port2 Service Type
: The current Service type on Phone 2, "Voice" or "Fax". If there is no call, it will
show “No Call”
/
button used to WAN connect/disconnect.
Show the current network signal strength and connection status. Detail as follows:
Name
Icon
Description
More real lines show stronger signal
Signal
strength
No signal
Connected
MODEM accesses network successfully
Disconnected
Disconnected with WiMAX network
Connection
Status
Connecting
MODEM is connecting or searching for WiMAX network
WiMAX Information
After access MODEM setup page successfully, please click
Status > WiMAX Information
link to
access the following screen:
WiMAX Status
WiMAX Status
to view WiMAX network information.
•
WAN IP
: IP address for WAN connection. It is the same IP address as the WiMAX IP Address
Page 20 / 47
•
BSID
: Base Station ID of the MODEM connected
•
Cell ID
: Cell ID of the MODEM connected
•
Frequency
: Frequency information
•
Tx Bytes
: Transmission flow statistic
•
Rx Bytes
: Receiver flow statistic
•
Connection Status
: WLAN connection status.
•
Connection Duration
: Duration of time for connection
•
RSSI
: Receive signal strength indicator
•
Tx Power
: Transmission power
•
PER
: Packet error ratio
•
CINR
: Carrier to interference and noise ratio
•
UL Modulation
: Adjustment encoding mode of uplink
•
DL Modulation
: Adjustment encoding mode of downlink
WiMAX Qos
WiMAX Quality of Service
•
BE
: Best Effort Service.
•
ERTPS
: Extended RTPS
•
UGS
: Unsolicited Grant Service
，
•
RTPS
: Real-time Polling Service
•
NRTPS
: Non-Real-time Polling Service
About My Modem
After access MODEM setup page successfully, please click
Status > About My Modem
link to access
the following screen:
19216811.live