Verizon MiFi-4620L Router Manual PDF (Setup & Configuration Guide)

Page 91 / 101 Scroll up to view Page 86 - 90

86

Product Speciﬁcations

General

Name:

Verizon MiFi 4620L Jetpack

Model:

MiFi 4620L

Approvals:

FCC (North America)

Weight:

90 g / 3.17 oz

Dimensions:

95 mm x 60 mm x 14 mm,

3.76 in x 2.36 in x 0.53 in

Wireless Network – Tri Mode:

LTE, CDMA, GSM

Wireless Network –

Wi-Fi Mode

802.11 b/g/n

Default SSID

MiFi4620L Jetpack XXXX Secure (see the

sticker on the back of your device for

your ID)

Battery

•

Size

•

Time required for full charge

1500 mAh

2.5-3 hours (when not in use)

Chip Set:

QUALCOMM® MDM9600

Interface Type:

Type B USB Port for Micro USB, used by

the wall charger

Technology/Bands

Technology:

LTE, CDMA 1X/EV-DO Rev A, HSPA+DC/WCDMA/EDGE/GPRS

Band Designation:

LTE 700 MHz

CDMA 1x/EV-DO RA; 800/1900 MHz

HSPA+/WCDMA; 850/900/1900/2100 MHz

EDGE/GPRS; 850/900/1800/1900 MHz

CDMA Transmit Band:

824.7-848.31 MHz/1851.25-1908.75 MHz

CDMA Receive Band:

869.7-893.31 MHz/1931.25-1988.75 MHz

Environmental

Operating Temperature:

-10 ° C to +45° C (14°F to 113° F)

Storage Temperature:

-20° C to 60° C (-4° F to 140° F)

Drop:

1 meter (3.28 feet) drop, no damage – fully operational

Vibration Stability:

5 Hz to 500 Hz, 0.1 octave/second

Page 92 / 101

87

Regulatory Statements

Federal Communications Commission Notice (FCC – United States)

Electronic devices, including computers and wireless modems, generate RF energy incidental to their

intended function and are therefore subject to FCC rules and regulations.

This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential environment.

This equipment generates radio frequency energy and is designed for use in accordance with the

manufacturer’s user manual. However, there is no guarantee that interference will not occur in any particular

installation. If this equipment causes harmful interference to radio or television reception, which can be

determined by turning the equipment oﬀ and on, ou are encouraged to try to correct the interference by

one or more of the following measures.

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is

subject to the following two conditions.

•

This device may not cause harmful interference.

•

This device must accept any interference received, including interference that may cause undesired

operation.

WARNING:

DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION

MAY VOID THE WARRANTY. THE MiFi 4620L MODEM IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR

TUNING IS REQUIRED. CONTACT NOVATEL WIRELESS TECHNICAL SUPPORT FOR INFORMATION ABOUT

SERVICING YOUR WIRELESS COMMUNICATION DEVICE.

FCC CAUTION:

Any changes or modiﬁcation not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

MODIFICATIONS:

The FCC requires that you be notiﬁed that any changes or modiﬁcations made to this

device that are not expressly approved by Novatel Wireless, Inc. may void your authority to operate the

equipment.

NOTE:

The Radio Frequency (RF) emitter installed in your modem must not be located or operated in

conjunction with any other antenna or transmitter, unless speciﬁcally authorized by Novatel Wireless

Technologies.

Page 93 / 101

88

RF Exposure Content

FCC Equipment Authorization ID

:

PKRNVWMIFI4620

This device is authorized for use in mobile and portable applications.

This product has been evaluated for SAR and meets the FCC Guidelines for exposure to radio waves.

For better signal reception, coverage range and data throughput, do not place the router near

any physical obstruction, including in a pocket or in close proximity of any object. For RF Safety, a

mandatory minimum of 10 mm (1 cm) should be maintained between the device and any part of

a human body when using the device. Increasing the separation between the device and the body

will result in better reception and reduced exposure to radio energy.

Page 94 / 101

89

Wireless Communications

IMPORTANT

Due to the transmission and reception properties of wireless communications,

data occasionally can be lost or delayed.

This can be due to the variation in radio signal strength that results from changes in the

characteristics of the radio transmission path. Although data loss is rare, the environment where you

operate the modem might adversely aﬀect communications.

Variations in radio signal strength are referred to as fading. Fading is caused by several diﬀerent

factors including signal reﬂection, the ionosphere, and interference from other radio channels.

Novatel Wireless or its partners will not be held responsible for damages of any kind resulting from

the delays or errors in data transmitted or received with the MiFi 4620L device, or failure of the

MiFi 4620L device to transmit or receive such data.

Limited Warranty and Liability

Novatel Wireless, Inc. warrants for the 12-month period immediately following receipt of the

Product by Purchaser that the Product will be free from defects in material and workmanship under

normal use.

THESE WARRANTIES ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING, WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE.

The exclusive remedy for a claim under this warranty shall be limited to the repair or replacement,

at Novatel Wireless’ option, of defective or non-conforming materials, parts or components.

The

foregoing warranties do not extend to (I) non conformities, defects or errors in the Products due

to accident, abuse, misuse or negligent use of the Products or use in other than a normal and

customary manner, environmental conditions not conforming to Novatel Wireless’ speciﬁcation, of

failure to follow prescribed installation, operating and maintenance procedures, (II) defects, errors or

nonconformity’s in the Product due to modiﬁcations, alterations, additions or changes not made in

accordance with Novatel Wireless’ speciﬁcations or authorized by Novatel Wireless, (III) normal wear

and tear, (IV) damage caused by force of nature or act of any third person, (V) shipping damage,

(VI) service or repair of Product by the purchaser without prior written consent from Novatel

Wireless, (VII) products designated by Novatel Wireless as beta site test samples, experimental,

developmental, reproduction, sample, incomplete or out of speciﬁcation Products, or (VIII) returned

products if the original identiﬁcation marks have been removed or altered.

Page 95 / 101

90

Safety Hazards

Do not operate the MiFi 4620L device in an environment that might be susceptible to radio

interference resulting in danger, speciﬁcally:

Areas where prohibited by the law

Follow any special rules and regulations and obey all signs and notices. Always turn oﬀ the host

device when instructed to do so, or when you suspect that it might cause interference or danger.

Where explosive atmospheres might be present

Do not operate your device in any area where a potentially explosive atmosphere might exist.

Sparks in such areas could cause an explosion or ﬁre resulting in bodily injury or even death. Be

aware and comply with all signs and instructions.

Users are advised not to operate the device while at a refueling point or service station. Users are

reminded to observe restrictions on the use of radio equipment in fuel depots (fuel storage and

distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. Potential

locations can include gas stations, below deck on boats, chemical transfer or storage facilities,

vehicles using liqueﬁed petroleum gas (such as propane or butane), areas where the air contains

chemicals or particles, such as grain, dust or metal powders, and any other area where you would

normally be advised to turn oﬀ your vehicle engine.

Near medical and life support equipment

Do not operate your device in any area where medical equipment, life support equipment, or near

any equipment that might be susceptible to any form of radio interference. In such areas, the host

communications device must be turned oﬀ. The device can transmit signals that could interfere

with this equipment.

On an aircraft, either on the ground or airborne

In addition to FAA requirements, many airline regulations state that you must suspend wireless

operations before boarding an airplane. Please ensure that the modem is turned oﬀ prior to

boarding aircraft in order to comply with these regulations. The modem can transmit signals that

could interfere with various onboard systems and controls.

While operating a vehicle

The driver or operator of any vehicle should not operate a wireless data device while in control of a

vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In

some countries, operating such communications devices while in control of a vehicle is an oﬀense.

Rate

Popular Verizon Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share