Page 76 / 101
Scroll up to view Page 71 - 75
71
The
Language
menu changes the MiFi Settings Web UI language.
The
Date/Time Format
menu changes the format of the date to reflect that used in the US or Europe.
It changes the format of the time to a 12- or 24-hour clock.
Buttons
•
Save
— Click this button to save any changes made to settings.
•
Cancel
— Click this button to cancel any changes made to settings.
Page 77 / 101
72
Diagnostics
The Diagnostics screen shows information about the MiFi 4620L firmware and other system-level
information. You can also view the system log. This screen is used mostly for troubleshooting and is
not required for normal operation. The Diagnostics screen has the following sections:
•
Modem
(See
Modem
on page 73.)
•
4G Network (LTE)
(See
4G Network (LTE)
on page 74.)
•
3G Network (EVDO/1xRTT)
(See
3G Network (EVDO/1xRTT)
on page 74.)
•
3G Network (GSM/WCDMA)
(See
3G Network (GSM/WCDMA)
on page 75.)
Page 78 / 101
73
Modem
The Modem section has the following:
•
MEID
— The Mobile Equipment Identifier (MEID) is used by the mobile data network to
identify this particular modem.
•
Phone Number (MDN)
— The Phone Number or Mobile Directory Number (MDN) is used by
the mobile data network to identify this particular data service.
•
FW Version
— The modem firmware version.
•
SIM Status
— Status of the
SIM card. If the SIM card is missing, or this field indicates some form
of SIM error, the MiFi device will not be able to connect to the mobile network.
•
ICCID
— The ID number assigned to the SIM Card.
•
MIN (MSID)
— The Mobile Identification Number (MIN) or Mobile Station ID (MSID) is the
number associated with the home service provider and the wireless phone number.
•
ESN
— The Electronic Serial Number, which is either blank or a pseudo-ESN which is not
guaranteed to be unique for devices that use an MEID.
•
Home SID
— System identifier for the home network.
•
ERI Version
— The Enhanced Roaming Indicator version that is currently installed.
•
PRL Version
— The version of the Preferred Roaming List (PRL), which tells the modem which
non-home carrier towers should provide roaming coverage.
Page 79 / 101
74
4G Network (LTE)
The 4G Network (LTE) section has the following:
•
Status
— Status of the network (Disabled, Not available, or Available).
•
Network Operator
— The vendor that currently provides wireless access.
•
RSSI
— Indicates the signal strength for LTE.
•
SINR
— A measure of signal quality; the higher the number the better the signal.
3G Network (EVDO/1xRTT)
The 3G Network (EVDO/1xRTT) section has the following:
•
Status
— Status of the network (Disabled, Not available, or Available).
•
RSSI (1x)
— Indicates the RSSI for the 1xRTT signal.
•
Technology
— The type of technology used to connect to the Internet.
•
RSSI (EVDO)
— Indicates the signal strength for the EVDO/eHRPD signal.
•
Network Operator
— The vendor that currently provides wireless access.
•
Ec/lo
— A measure of how clean the signal is, and is a type of signal-to-noise ratio.
•
SID
— System identifier for the network.
Page 80 / 101
75
3G Network (GSM/WCDMA)
The 3G Network (GSM/WCDMA) section has the following:
•
Status
— Status of the network (Disabled, Not available, or Available).
•
Technology
— The type of technology used to connect to the Internet.
•
Network Operator
— The vendor that currently provides wireless access.
•
RSSI
— Indicates the signal strength for the GSM/WCDMA signal.
•
Cell ID
— Identifies the cell tower currently used.
•
Band Preference
— A modem setting which determines the network technology used when
multiple technologies are available.
Buttons
•
Field Test
— Click this button to run the Field Test. The Field Test will provide a large quantity
of diagnostic information, which will be displayed in a new window.
19216811.live