Page 161 / 208 Scroll up to view Page 156 - 160
To view a summary of the services provided by the DHCP server:
1.
Select
IP Address Distribution
in the Advanced page.
DHCP SERVER SETTINGS
You can edit the DHCP server settings for a device.
To edit the settings:
1.
On the IP Address Distribution page, click the
Edit
icon in
the
Action
column. The DHCP Settings page opens with the
device information displayed.
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
160
ADVANCED SETTINGS
08
/ CONFIGURING
Page 162 / 208
2.
To enable the DHCP server, select
DHCP Server
in the
IP
Address Distribution
field.
Once enabled, the DHCP server provides automatic IP
assignments (IP leases) based on the preset IP range defined
below.
3.
To configure the DHCP server complete the following fields:
Start IP Address
– enter the first IP address that your
Gateway will automatically begin assigning IP addresses
from. Since your Gateway’s default IP address is
192.168.1.1, the default start IP address should be
192.162.1.2.
End IP Address
– enter the last IP address that your
Gateway will automatically stop the IP address allocation.
The maximum end IP address range that can be entered is
192.168.1.254.
WINS Server
– determines the IP address associated with
a network device.
Lease Time in Minutes
– assigns the amount of time in
minutes that each device is assigned an IP address by the
DHCP server when it connects to the network.
When the lease expires, the server determines if the
computer has disconnected from the network. If it has,
the server may reassign this IP address to a newly-
connected computer.
Provide Host Name if Not Specified by Client
– when
activated, your Gateway assigns a default name to the
client, if the DHCP client has no host name.
ROUTING
Page 163 / 208
4.
Click
Apply
to save changes.
DHCP CONNECTIONS
You can view a list of the connections currently assigned and
recognized by the DHCP server. In addition, you can add a new
connection with a fixed IP address.
NOTE:
The fixed IP address of a device is assigned to the MAC address of
the network card installed on the network computer. If this network card is
replaced, you must update the device entry in the DHCP Connections list with
the MAC address of the new network card.
To view a list of computers:
1.
On the IP Address page, click
Connection List
.
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
162
ADVANCED SETTINGS
08
/ CONFIGURING
Page 164 / 208
2.
To define a new Static Connection with a fixed IP address,
click
Add Static Connection
.
3.
Enter the host name.
4.
Enter the fixed IP address to be assigned.
5.
Enter the MAC address of the network interface of the
computer used with this DHCP static connection.
6.
Click
Apply
to save changes.
8.5/
DATE AND TIME
You can configure the following settings:
Date and Time Settings
– sets the time zone and enables automatic
time updates.
Scheduler Rules
– limits the activation of firewall rules to specific
time periods.
DATE
AND TIME
Page 165 / 208
8.5a/
DATE AND TIME SETTINGS
You can set the time zone and enable automatic time updates.
To configure the settings:
1.
Select
Date and Time
in the Advanced page.
2.
Select the local time zone. Your Gateway automatically
detects daylight saving times for selected time zone.
3.
In the
Automatic Time Update
section, select the
Enabled
check to perform an automatic time update.
4.
Define the time server addresses by clicking
Add
. The Time
Server Settings page displays.
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
164
ADVANCED SETTINGS
08
/ CONFIGURING

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top