Page 151 / 208
Scroll up to view Page 146 - 150
150
ADVANCED SETTINGS
08
/ CONFIGURING
3.
Check to either ‘Obtain IPv6 DNS Server address
automatically’, or to ‘Use the following IPv6 DNS Server
addresses’
4.
After entering all appropriate IPv6 settings click Apply to
have changes take effect.
DHCPv6 WAN WITH LAN IPv6 STATEFUL (DHCPv6) SETTINGS:
1.
To configure IPv6 WAN Stateful (DHCPv6) mode, select the
Stateful (DHCPv6) option on the IPv6 Configuration Control
Page as shown below:
2.
Specify the Stateful (DHCPv6) settings to be used to assign
LAN IPv6 addresses by entering the following details:
•
IPv6 LAN Configuration
(select
Stateful
from the drop-
down list)
as shown in drop-down list and page below:
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
Page 152 / 208
•
LAN Prefix
•
LAN IPv6 Link Local Address
(automatically populated)
•
LAN IPv6 Address Range
(start and end)
•
Router Advertisement Lifetime
(minutes between 0-150)
•
IPv6 Address Lifetime
(minutes between 3-150)
•
Interfaces
- check one or more of the box(s) to apply IPv6
LAN settings to the selected interfaces:
–
Ethernet/Coax IPv6 Enabled
–
Wireless Access Point 1 IPv6 Enabled
–
Wireless Access Point 2 IPv6 Enabled
3.
After entering all appropriate IPv6 settings click Apply to
have changes take effect.
DHCPv6 WAN WITH LAN IPv6 STATELESS SETTINGS:
1.
To configure IPv6 LAN Stateless mode with DHCPv6 WAN,
select the Stateless option on the IPv6 Configuration
Control Page as shown below:
ROUTING
Page 153 / 208
152
ADVANCED SETTINGS
08
/ CONFIGURING
2.
Specify the Stateless settings to be used to assign LAN IPv6
addresses by entering the following details:
•
IPv6 LAN Configuration
(select
Stateless
from the drop-
down list)
as shown in drop-down list and page below:
•
LAN Prefix
(automatically populated)
•
LAN IPv6 Link Local Address
(automatically populated)
•
Router Advertisement Lifetime
(minutes between 0-150)
•
Interfaces
- check one or more of the box(s) to apply IPv6
LAN settings to the selected interfaces:
–
Ethernet/Coax IPv6 Enabled
–
Wireless Access Point 1 IPv6 Enabled
–
Wireless Access Point 2 IPv6 Enabled
3.
After entering all appropriate IPv6 settings click Apply to
have changes take effect.
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
Page 154 / 208
LAN IPv6 CONFIGURATION WITHOUT AN IPv6 WAN
CONNECTION:
1.
To configure IPv6 to use either the IPv6 LAN Stateful
or Stateless mode without using an IPv6 Internet WAN
connection, select the
None
option on the IPv6 Configuration
Control Page as shown below:
2.
After entering all appropriate IPv6 settings click Apply to
have changes take effect.
LAN IPv6 STATEFUL (DHCPv6) WITH NO WAN SETTINGS:
1.
To configure IPv6 LAN Stateful mode with No WAN
connection, select the Stateful option on the IPv6
Configuration Control Page as shown below:
ROUTING
Page 155 / 208
154
ADVANCED SETTINGS
08
/ CONFIGURING
2.
Specify the
Stateful (DHCPv6)
settings to be used to assign
LAN IPv6 addresses by entering the following details:
•
IPv6 LAN Configuration
(select
Stateful
from the drop-
down list)
as shown in drop-down list and page below:
•
LAN IPv6 Link Local Address
(automatically populated)
•
LAN IPv6 Address Range
(start and end)
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
19216811.live