Page 146 / 208 Scroll up to view Page 141 - 145
STATIC - WAN IPv6 ADDRESS CONNECTION
The IPv6 WAN Static configurations are IPv6 settings that you enter
manually. These specific IPv6 addresses and settings are not expected
to change frequently.
1.
To configure IPv6 WAN
Static
mode, select the Static option
on the IPv6 Configuration Control Page as shown below:
2.
Specify the
Static
method to be used to obtain your WAN
IPv6 Address by entering:
IPv6 WAN Configuration
(select Static)
as shown in drop-
down list and page below:
ROUTING
Page 147 / 208
146
ADVANCED SETTINGS
08
/ CONFIGURING
IPv6 WAN Address
Prefix Length
(A numeric value between 16 and 128)
Default Gateway
Primary DNS Server
Secondary DNS Server
3.
After entering all appropriate IPv6 settings click Apply to
have changes take effect.
STATIC - WAN IPv6 ADDRESS CONNECTION
1.
To configure IPv6 LAN Stateful mode with Static
WAN, select the Stateful (DHCPv6) option on the IPv6
Configuration Control Page as shown below:
2.
Specify the
Stateful (DHCPv6)
settings to be used to assign
LAN IPv6 addresses by entering the following details:
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
Page 148 / 208
IPv6 LAN Configuration
(select
Stateful
from the drop-
down list) as shown in drop-down list and page below:
LAN Prefix
LAN IPv6 Link Local Address (automatically populated)
LAN IPv6 Address Range
(start and end)
Router Advertisement Lifetime
(minutes between 0-150)
IPv6 Address Lifetime
(minutes between 3-150)
Interfaces -
check one or more of the box(s) to apply IPv6
LAN settings to the selected interfaces:
Ethernet/Coax IPv6 Enabled
Wireless Access Point 1 IPv6 Enabled
Wireless Access Point 2 IPv6 Enabled
3.
After entering all appropriate IPv6 settings click Apply to
have changes take effect.
STATIC WAN WITH LAN IPv6 STATELESS SETTINGS:
1.
To configure LAN IPv6 Stateless mode with
Static
WAN,
select the Stateless option on the IPv6 Configuration
Control Page as shown below:
ROUTING
Page 149 / 208
148
ADVANCED SETTINGS
08
/ CONFIGURING
2.
Specify the settings to be used to assign LAN IPv6
addresses by entering the following details:
IPv6 LAN Configuration
(select
Stateless
from the drop-
down list)
as shown in drop-down list and page below:
LAN Prefix
LAN IPv6 Link Local Address
(automatically populated)
Router Advertisement Lifetime
(minutes between 0-150)
Interfaces
-
check one or more of the box(s) to apply IPv6
LAN settings to the selected interfaces:
Ethernet/Coax IPv6 Enabled
Wireless Access Point 1 IPv6 Enabled
Wireless Access Point 2 IPv6 Enabled
verizon.com/fios
|
©
2014 Verizon. All Rights Reserved.
Page 150 / 208
ROUTING
3.
After entering all appropriate IPv6 settings click Apply to
have changes take effect.
DHCPv6 - WAN IPv6 ADDRESS CONNECTION
The IPv6 WAN DHCPv6 configurations are IPv6 settings that you
enter that will allow your IPv6 connection to be updated by the ISP as
needed.
1.
To configure IPv6 WAN Stateful (DHCPv6) mode, select the
Stateful (DHCPv6) option on the IPv6 Configuration Control
Page as shown below:
2.
Specify the DHCPv6 method to be used to obtain your WAN
IPv6 Address by entering:
IPv6 WAN Configuration
(select
DHCPv6
from the drop-
down list)
as shown in drop-down list and page below:

Rate

4.7 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top