Page 11 / 123 Scroll up to view Page 6 - 10
8
Chapter 3
Setup
This Chapter provides Setup details of the TW100-BRV304.
Overview
This chapter describes the setup procedure for:
Internet Access
LAN configuration
PCs on your local LAN may also require configuration. For details, see
Chapter 4 - PC Con-
figuration
.
Other configuration may also be required, depending on which features and functions of the
TW100-BRV304 you wish to use. Use the table below to locate detailed instructions for the
required functions.
Configure PCs on your LAN.
Chapter 4:
PC Configuration
Check TW100-BRV304 operation and Status.
Chapter 5:
Operation and Status
Use any of the following Internet features:
Advanced Setup (Applications, DMZ)
Dynamic DNS
Virtual Servers
MAC Address
Options(Backup DNS, MTU)
Chapter 6:
Internet Features
Change any of the following Security-related settings:
Admin Login
Access Control
Firewall Rules
Logs
Security Options (TFTP, Firewall)
Scheduling (used by Access Control)
Services
Chapter 7:
Security Configuration
Describe the VPN capabilities and configuration required
for common situations.
Chapter 8:
VPN
3
Page 12 / 123
Setup
9
Configure or use any of the following:
PC Database
Remote Admin
Routing (RIP and static Routing)
Upgrade firmware
Enable/Disable UPnP Support
Chapter 9:
Other Features and Settings
Configuration Program
The TW100-BRV304 contains an HTTP server. This enables you to connect to it, and config-
ure it, using your Web Browser.
Your Browser must support JavaScript
. The configuration
program has been tested on the following browsers:
Netscape V4.08 or later
Internet Explorer V4 or later
Preparation
Before attempting to configure the TW100-BRV304, please ensure that:
Your PC can establish a physical connection to the TW100-BRV304. The PC and the
TW100-BRV304 must be directly connected (using the Hub ports on the TW100-BRV304)
or on the same LAN segment.
The TW100-BRV304 must be installed and powered ON.
If the TW100-BRV304 's default IP Address (192.168.0.1) is already used by another
device, the other device must be turned OFF until the TW100-BRV304 is allocated a new
IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the TW100-BRV304 will appear in the
system tray, notifying you that a new network device has been found, and offering to create a
new desktop shortcut to the newly-discovered device.
Unless you intend to change the IP Address of the TW100-BRV304, you can accept the
desktop shortcut.
Whether you accept the desktop shortcut or not, you can always find UPnP devices in
My
Network Places
(previously called
Network Neighborhood
).
Double - click the icon for the TW100-BRV304 (either on the Desktop, or in
My Network
Places
) to start the configuration. Refer to the following section
Setup Wizard
for details
of the initial configuration process.
Using your Web Browser
To establish a connection from your PC to the TW100-BRV304:
1.
After installing the TW100-BRV304 in your LAN, start your PC. If your PC is already
running, restart it.
Page 13 / 123
TW100-BRV304 User Guide
10
2.
Start your WEB browser.
3.
In the
Address
box, enter "HTTP://" and the IP Address of the TW100-BRV304, as in this
example, which uses the TW100-BRV304 's default IP Address:
HTTP://192.168.0.1
4.
You will be prompted for a username and password, as shown below.
Figure 5: Password Dialog
Enter admin
for the User Name, and leave the Password blank.
Both the name and password can (and should) be changed, using the
Admin Login
screen.
Page 14 / 123
Setup
11
Setup Wizard
The first time you connect to the TW100-BRV304, the Setup Wizard will run automatically.
(The Setup Wizard will also run if the TW100-BRV304's default setting are restored.)
1.
Step through the Wizard until finished.
You need to know the type of Internet connection service used by your ISP. Check
the data supplied by your ISP.
The common connection types are explained in the tables below.
2.
On the final screen of the Wizard, run the test and check that an Internet connection can be
established.
3.
If the connection test fails:
Check your data, the Cable/DSL modem, and all connections.
Check that you have entered all data correctly.
If using a Cable modem, your ISP may have recorded the MAC (physical) address of
your PC. Run the Wizard, and on the
Cable Modem
screen, use the "Clone MAC ad-
dress" button to copy the MAC address from your PC to the TW100-BRV304.
Common Connection Types
Cable Modems
Dynamic
IP Address
Your IP Address is allocated
automatically, when you
connect to you ISP.
Usually, none.
However, some ISP's may
require you to use a particular
Hostname, Domain name, or
MAC (physical) address.
Static (Fixed)
IP Address
Your ISP allocates a perma-
nent IP Address to you.
IP Address allocated to you,
mask and gateway (if provided),
and DNS address.
Some ISP's may also require
you to use a particular Host-
name, Domain name, or MAC
(physical) address.
DSL Modems
Dynamic
IP Address
Your IP Address is allocated
automatically, when you
connect to you ISP.
None.
Static (Fixed)
IP Address
Your ISP allocates a perma-
nent IP Address to you.
IP Address allocated to you,
mask and gateway (if provided),
and DNS address.
PPPoE
You connect to the ISP only
when required. The IP address
is usually allocated automati-
cally.
User name and password.
Page 15 / 123
TW100-BRV304 User Guide
12
PPTP
Mainly used in Europe.
You connect to the ISP only
when required. The IP address
is usually allocated automati-
cally, but may be Static
(Fixed).
PPTP Server IP Address.
User name and password.
IP Address allocated to
you, if Static (Fixed).
Other Modems (e.g. Broadband Wireless)
Dynamic
IP Address
Your IP Address is allocated
automatically, when you
connect to you ISP.
Usually, none.
However, some ISP's may
require you to use a particular
Hostname, Domain name, or
MAC (physical) address.
Static (Fixed)
IP Address
Your ISP allocates a perma-
nent IP Address to you.
IP Address allocated to you,
mask and gateway (if provided),
and DNS address.
Big Pond Cable (Australia)
For this connection method, the following data is required:
User Name
Password
Big Pond Server IP address
SingTel RAS
For this connection method, the following data is required:
User Name
Password
RAS Plan

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top