TW100-BRV204 User Guide
98
Windows 2000 Server Configuration
Configuration is the same as for
Example 2: Windows 2000/XP Client to
except for specifying
the
Source
and
Destination
addresses for the "Filter Properties". Instead, for both IP Filters, the
Filter Properties- Addressing
should be completed as follows.
Figure 83: Windows 2000 Server - Addressing
•
The
Source Address
should be set to "A specific IP Subnet", and the
IP address
and
Subnet mask
set to the address range used on the TW100-BRV204's LAN.
•
The
Destination Address
should be set to "A specific IP Subnet", and the
IP address
and
Subnet mask
set to the address range used on the Windows 2000 LAN.