Page 6 / 99 Scroll up to view Page 1 - 5
Broadband Router User Guide
2
Fixed or Dynamic IP Address.
On the Internet (WAN port) connection, the TW100-
BRF114U supports both Dynamic IP Address (IP Address is allocated on connection) and
Fixed IP Address.
Advanced Internet Functions
Communication Applications.
Support for Internet communication applications, such
as interactive Games, Telephony, and Conferencing applications, which are often difficult
to use when behind a Firewall, is included.
Special Internet Applications.
Applications which use non-standard connections or
port numbers are normally blocked by the Firewall. The ability to define and allow such
applications is provided, to enable such applications to be used normally.
Virtual Servers.
This feature allows Internet users to access Internet servers on your
LAN. The required setup is quick and easy.
DDNS Support.
DDNS (Dynamic DNS) allows Internet users to connect to Virtual
Servers on your LAN using a domain name, even if your IP address is not fixed. A num-
ber of popular DDNS services are supported.
Multi-DMZ.
For each WAN (Internet) IP address allocated to you, one (1) PC on your
local LAN can be configured to allow unrestricted 2-way communication with Servers or
individual users on the Internet. This provides the ability to run programs which are in-
compatible with Firewalls.
URL Filter.
Use the URL Filter to block access to undesirable Web sites by LAN users.
Internet Access Log.
See which Internet connections have been made.
Access Control.
Using the Access Control feature, you can assign LAN users to differ-
ent groups, and determine which Internet services are available to each group.
VPN Pass through Support.
PCs with VPN (Virtual Private Networking) software
using PPTP, L2TP and IPSec are transparently supported - no configuration is required.
LAN Features
4-Port Switching Hub.
The TW100-BRF114U incorporates a 4-port 10/100BaseT
switching hub, making it easy to create or extend your LAN.
DHCP Server Support.
D
ynamic
H
ost
C
onfiguration
P
rotocol provides a dynamic IP
address to PCs and other devices upon request. The TW100-BRF114U can act as a
DHCP
Server
for devices on your local LAN and WLAN.
Multi Segment LAN Support.
LANs containing one or more segments are supported,
via the TW100-BRF114U 's RIP (Routing Information Protocol) support and built-in
static routing table.
Shared USB Printer (Network Printer).
A printer connected to the TW100-
BRF114U ‘s USB port can be shared by all Windows PCs on your LAN, using the
provided Print Port driver. Unix systems can also share the printer, using LPD.
Configuration & Management
Easy Setup.
Use your WEB browser from anywhere on the LAN or WLAN for configu-
ration.
Configuration File Upload/Download.
Save (download) the configuration data from
the Broadband Router to your PC, and restore (upload) a previously-saved configuration
file to the TW100-BRF114U.
Downloaded from
www.Manualslib.com
manuals search engine
Page 7 / 99
Introduction
3
Remote Management.
The TW100-BRF114U can be managed from any PC on your
LAN. And, if the Internet connection exists, it can also (optionally) be configured via the
Internet.
Network Diagnostics.
You can use the TW100-BRF114U to perform a
Ping
or
DNS
lookup
.
UPnP Support.
UPnP (Universal Plug and Play) allows automatic discovery and con-
figuration of the Broadband Router. UPnP is by supported by Windows ME, XP, or later.
Security Features
Password - protected Configuration
.
Optional password protection is provided to
prevent unauthorized users from modifying the configuration data and settings.
NAT Protection.
An intrinsic side effect of NAT (Network Address Translation) tech-
nology is that by allowing all LAN users to share a single IP address, the location and
even the existence of each PC is hidden. From the external viewpoint, there is no network,
only a single device - the TW100-BRF114U.
Stateful Inspection Firewall.
All incoming data packets are monitored and all incom-
ing server requests are filtered, thus protecting your network from malicious attacks from
external sources.
Protection against DoS attacks.
DoS (Denial of Service) attacks can flood your
Internet connection with invalid packets and connection requests, using so much band-
width and so many resources that Internet access becomes unavailable. The Broadband
Router incorporates protection against DoS attacks.
Package Contents
The following items should be included:
The TW100-BRF114U Unit
Power Adapter
Quick Installation Guide
CD-ROM containing the on-line manual and Print Port Driver.
If any of the above items are damaged or missing, please contact your dealer immediately.
Downloaded from
www.Manualslib.com
manuals search engine
Page 8 / 99
Broadband Router User Guide
4
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
Power
On
- Power on.
Off
- No power.
Status (Red)
On
- Error condition.
Off
- Normal operation.
Blinking
- This LED blinks during start up.
LAN
For each port, there are 2 LEDs
Link/Act
On
- Corresponding LAN (hub) port is active.
Off
- No active connection on the corresponding LAN (hub) port.
Flashing
- Data is being transmitted or received via the corre-
sponding LAN (hub) port.
100
On
- Corresponding LAN (hub) port is using 100BaseT.
Off
- Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WAN
On
- Connection to the broadband modem attached to the WAN (Internet)
port is established.
Off
- No connection to the broadband modem on the WAN (Internet) port.
Flashing
- Data is being transmitted or received via the WAN port.
Printer
On
- Connection to printer established.
Off
- No connection to printer; printer is Off or Off-line.
Flashing
- Data is being transmitted to the printer.
Downloaded from
www.Manualslib.com
manuals search engine
Page 9 / 99
Introduction
5
Rear Panel
Figure 3: Rear Panel
USB Printer Port
If you wish to share a printer, connect it here.
Reset Button
This button has two (2) functions:
Reboot
.
When pressed and released, the TW100-BRF114U will
reboot (restart).
Clear All Data
.
This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1.
Power Off.
2.
Hold the Reset Button down while you Power On.
3.
Keep holding the Reset Button for a few seconds, until the RED
LED has flashed TWICE.
4.
Release the Reset Button. The TW100-BRF114U is now using
the factory default values.
WAN port
(10/100BaseT)
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
10/100BaseT
LAN connections
Use standard LAN cables (RJ45 connectors) to connect your PCs to
these ports.
Note:
Any LAN port on the TW100-BRF114U will automatically function
as an "Uplink" port when required. Just connect any port to a normal
port on the other hub, using a standard LAN cable.
Power port
Connect the supplied power adapter here.
Downloaded from
www.Manualslib.com
manuals search engine
Page 10 / 99
6
Chapter 2
Installation
This Chapter covers the physical installation of the Broadband Router.
Requirements
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and either a DSL or Cable
modem.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the TW100-BRF114U.
Ensure the TW100-BRF114U and the DSL/Cable modem are powered OFF.
2. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the TW100-
BRF114U. Both 10BaseT and 100BaseT connections can be used simultaneously.
If required, connect any port to a normal port on another Hub, using a standard LAN cable.
Any LAN port on the TW100-BRF114U will automatically function as an "Uplink" port
when required.
2
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top