1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TVP-221H
    5. /
  5. 5
Page 21 / 100 Scroll up to view Page 16 - 20
TVP-221H User’s Guide
21
5. On the
IP Address
table, enter values as follows:
•
Specify an IP address
set ON.
•
IP Address
: 192.168.0.2
•
Subnet Mask
: 255.255.255.0
Restart your PC and Start your WEB browser.
6. In the
Address
box, enter the following:
HTTP://192.168.0.1
(This is the default IP in the gateway from factory)
7. Press enter to confirm and you should find the screen below.
8. The User name is
admin
(all lower case). Password is
123
. Both
admin
and
123
are default strings from factory. For security reasons, please change and memorize
the new password after this first setup.
9. Click “OK”.
The main screen will appear as b elo w.
Page 22 / 100
TVP-221H User’s Guide
22
Main Menu Function Briefings
Home
View System Status
H.323 Configuration
Set H.323 Parameters
Dial Plan Settings
Links to dial plan setting / entry / store /
clear / restore pages. You should
complete the dial Plan work sheets
before working in this menu.
Line Settings
Set Line Settings including Channel
Status, Codec Selection, Common
Parameters, Channel Parameters and
Telephony Ports
Administration
Set
Password, Telnet Access, Interface
Speed
Status
View current System Status
Help
Definitions of Graphical User Interface
Terms and Parameters for Dial Plan
Setup, H.323 Configurations, DDNS
Manual
Link to Trendware FTP Website, online
user manual and support materials.
Page 23 / 100
TVP-221H User’s Guide
23
System Status
Select
Home
In order to view the System Status page,
please
navigate
to
Home.
The System Status page will display the following parameters:
Firmware Version
•
TVP-221H VoIP Gateway Version:
•
Boot Loader Version:
•
RTOS Version:
•
H.323 Stack Version:
•
DSP image Version:
•
TSG Version:
LAN Interface Parameters
•
IP precedence:
•
Ethernet MAC address:
•
IP address:
•
Subnet mask:
•
Default gateway:
4.2
Internet Access
The TVP-221H can be configured with a fixed IP address, subnet mask and
default gateway (typically a router). The TVP-221H can also be setup as a DHCP
Client if your network has a DHCP Server (typically a router). Additionally, the
TVP-221H can also be configured to use PPPoE. With PPPoE, you will have a
Dynamic IP but combined with Dynamic DNS, the TVP-221H will automatically
notify DynDNS of your changing IP Address and DynDNS will in turn, map it to
your registered Domain Name. Consult your network manager to obtain a unique
and static IP address for the TVP-221H, the IP subnet mask and default gateway
of your network, and fill out the work sheet in Appendix D before configuring the
gateway..
The first time you connect the TVP-221H for configuration, you will need to
connect to it under the same LAN segment to set the Fixed IP or DHCP, PPPoE
clients. The default TVP-221H IP address is 192.168.0.1. To configure the TVP-
221H, insert one end of the Ethernet cable into the RJ45 port on the rear panel of
the TVP-221H and other end directly to your PC Terminal. The TVP-221H
supports auto MDIX so you do not have to worry about the cable. Any Cat 3 or 5
cable will be sufficient. Once Internet Access has been set up, disconnect the
TVP-221H from the configuring PC and connect it directly to your ADSL Cable
Modem or place it under a router as configured.
Page 24 / 100
TVP-221H User’s Guide
Fixed IP – Connection Details
If you are using a Fixed IP,
you are either using a fixed IP as assigned by your ISP or
your Systems Administrator. Please enter your Fixed IP as designated by your ISP along
with Subnet Mask and Default Gateway. If you have a locally assigned Fixed IP, please
talk with your Systems Administrator.
Data - Fixed IP address Screen
Internet
Physical
Address
The hardware address of this device, as seen by remote
devices on the Internet. (This is different to the hardware
address seen by devices on the local LAN.)
IP Address
This address is allocated by your ISP (Internet Service
Provider) or System Administrator (if it is a local IP,
the IP
must be in the same segment as your Gateway & Router)
Network
Mask
The Network Mask associated with the IP Address above.
Default
Gateway
The IP Address of the remote Gateway or Router associated
with the IP Address above.
IP TOS
Fill in and “
IP TOS
” parameter for ‘Precedence’, ‘Delay’,
‘Throughput’ and ‘Reliability’ if your ISP provides these
features.
DNS IP
Address
The IP Address of the Domain Name Server which is
currently used.
DHCP
Client
This will show "Enabled" or "Disabled", depending on
whether or not this device is functioning as a DHCP client.
If "Enabled" the "Remaining lease time" field indicates when
the IP Address allocated by the DHCP Server will expire. The
lease is automatically renewed on expiry; use the "Renew"
button if you wish to manually renew the lease immediately.
24
Page 25 / 100
TVP-221H User’s Guide
25
DHCP Client
If you will be using the DHCP with a DHCP server on your local LAN
1.
Select
Yes
2.
Click
on
OK
3.
Click on
Reboot
for changes to take effect
PPPoE
If you will be using the PPPoE as assigned my your ISP
1.
Select
Yes
2.
Enter
Service name, User Name
and
Password
as provided by your ISP
3.
Click
on
OK
4.
Click on
Reboot
for changes to take effect
Note
:
If you are assigned a Dynamic IP,
you will have to register for a DDNS (Dynamic
Domain Name Server).
See 4.23 for details

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top