Q1:
A1:
Q2:
A2:
Q3:
A3:
Q4:
A4:
Q5:
A5:
Q6:
A6:
Q7:
A7:
SetupWizard is unable to detect my camera.
What should I do?
First, verify that you have followed all the steps in the Section 2: Hardware Installation
and Configuration.
Second, disable any software firewall programs such as ZoneAlarm or
Norton Internet Security.
If you are using Windows XP or Windows Vista, disable the built in
firewall.
Third, click on Re-Scan in the SetupWizard.
I do not have a DHCP server or DHCP is disabled on my network and I am unable to
configure the TV-IP600/TV-IP600W.
What should I do?
First, go to the TCP/IP settings on your computer and assign a static IP address on your
computer's network adapter in the subnet of 192.168.10.x.
Since the default IP address of
the TV-IP600/TV-IP600W is
192.168.10.30, do not assign a static IP address of
192.168.10.30 on your computer's network adapter.
Second, open Internet Explorer and
The Image is blurry.
How can I adjust the focus on the IP Camera?
You can adjust the IP Camera's focus by rotating the lens.
Live video does not appear when I click on Live View.
What should I do?
First, make sure that you are using a browser that supports ActiveX or Java.
Second,
when viewing in ActiveX mode, make sure that you added ActiveX control.
See steps 25 to
26 in Section 2:
Hardware Installation and Configuration
.
Third, when viewing in Java
mode, make sure that you have the latest version of Java installed.
Please go to
How do I connect the TV-IP600/TV-IP600W to my wireless router or access point?
Make sure that you configure the camera to have the same SSID, encryption mode and
key (if enabled).
Follow the instructions in section 2:
Hardware Installation and
Configuration
to configure the camera with the SSID and encryption key
.
After I successfully configured the TV-IP600/TV-IP600W to match my wireless network
settings, I can not connect to the camera.
First, verify that the wireless settings match your wireless network settings.
Second,
make sure to disconnect the Ethernet cable from the camera and verify that the
LINK
LED is
blinking red.
I forgot my password.
What should I do?
Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.
This will return settings back to factory defaults.
Open up the SetupWizard program to find
out the IP address of the camera (see step 11 in Section 2:
Hardware Installation and
Configuration.
If you do not have a DHCP server on your network, the default IP address is
192.168.10.30.
The default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the
TV-IP600/TV-IP600W,
please
contact TRENDnet's Technical Support Department.
10
Troubleshooting
19216811.live