Page 6 / 15
Scroll up to view Page 1 - 5
English
4
7.
Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet
port on the IP Camera.
8.
Connect the AC Power Adapter to
the
IP Camera
and then to a power
outlet.
6.
Double click on the
SetupWizard
icon on your desktop.
5.
Click
Close
.
9.
Click
Next
.
10.
Select the IP camera and click
Next
.
Page 7 / 15
English
5
13.
Select
DHCP
and then click
Next
.
15.
Click
Next
.
14.
Configure your
Camera Name
,
Camera Time
and
Camera Date
and then click
Next
.
11.
Enter your ID and password.
Then click
Next
.
By default:
ID:
admin
Password:
admin
12.
If you would like to change the
administrator password, click
Change Password
, enter a new
password, retype the new
password and then click
Next
.
Page 8 / 15
English
6
17.
Click on the following URL or click
Link
to open up the browser
configuration.
18.
Right click on the yellow bar and
select
Install
ActiveX Control
.
20.
Right click on the yellow bar and
select
Install
ActiveX Control
.
16.
Please wait while the settings on
your cameras are being saved.
19.
Click
Install.
Page 9 / 15
English
7
22.
Live Video will now appear.
23.
Use the command icons to control
the camera
21.
Click
Run
.
Note: For detailed information regarding the
TV-IP512P
configuration and
advanced settings, please refer to the Troubleshooting section, User's Guide
Your installation is now complete.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
Page 10 / 15
2.
Verify that the LEDs are on. Please
refer to step 4 in the Hardware
Installation section.
English
8
Using the TV-IP512P with a PoE switch
3. Power over Ethernet (PoE) Installation
1.
Connect a RJ-45 cable from the
Power Over Ethernet switch (e.g.
TPE-80WS) to the
LAN
port on the
Internet Camera Server.
19216811.live