Given below is full router user manual of TRENDnet TV-IP400W router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 9
English
......................................................................................................
Troubleshooting
........................................................................................
1
1
3
2
5
1. Before You Start
2. Hardware Installation
.........................................................................
3. Configure the Internet Camera
..........................................................
.................................................................................
Table of Contents
Version 10.24.2006
Page 3 / 9
System Requirements
Application
TV-IP400/TV-IP400W
Quick Installation Guide
Mounting plate
Utility CD-ROM
AC Power Adapter
CD-ROM Drive
10/100Mbps Ethernet
CPU: 1GHz or above
Memory: 256MB or above
VGA Resolution: 800 x 640 or above
Web Browser: Internet Explorer 5.0 or above
Package Contents
1. Before You Start
English
1
1 x 2dBi Detachable Antenna
(TV-IP400W)
Parking
Monitoring
(TV-IP400W)
Warehouse
Monitoring
(TV-IP400W)
Firewa l Router
(TW100-BRF114)
Workstation with
PCI Adapter
(TE100-PCIWN)
Wireless Access Point
(TEW-430APB)
Cable/DSL
Modem
Internet
Office
Monitoring
(TV-IP400)
Front Gate
Monitoring
(TV-IP400)
Page 4 / 9
2. Hardware Installation
English
2
1.
Place the camera on a flat, level
surface.
2.
Attach the Antenna. (TV-IP400W)
3.
Connect the AC Power Adapter to
the back of the camera.
4.
Connect the AC Power Adapter to
a power outlet.
5.
Connect a RJ-45 network cable
from a Switch/Hub to the
Ethernet
port of the Internet Camera.
Page 5 / 9
English
3
1.
Open your web browser, type
in the Address
bar, and press
Enter
.
3. Configure the Internet Camera
Note: It is recommended that you configure the Internet Camera from a wired
computer.
Before the Internet Camera can be configured, a Static IP address
must be assigned on your computer's network adapter in the subnet of
192.168.0.x.
Since the Internet Camera's default IP address is
192.168.0.20 ,
make sure no other network devices are assigned an IP address of
192.168.0.20.
(Refer to the Troubleshooting section on how to configure
TCP/IP settings on your PC.)
2.
Click
Administration
.
3.
Click
Configuration
and then click
Network
.
Configure the
network
settings to be in the same subnet
as your network.
Then click
Save
.
19216811.live