Page 6 / 15
Scroll up to view Page 1 - 5
English
4
3. Configure the Internet Camera
Note:
1. It is recommended that you configure the IP Camera from a wired computer.
2. If you would like to use SecurView software, please refer to the User's Guide
on the CD for more information.
2.
Follow the
Installation Wizard
instructions and then click
Close
.
3.
Go to
Start -> Programs ->
TRENDnet -> IPSetup
and click
IPSetup
.
1.
Insert the Utility CD-ROM into your
CD-ROM drive and then click
IP Setup
.
Note:
By default, the IP setting on the TV-IP121W is set to DHCP.
Please
skip to step 8.
If you want to give the TV-IP121W a static IP address, continue
on to step 4.
Page 7 / 15
English
5
4.
Select the IP camera and click
Change IP
.
5.
Configure the IP address to be in
the same subnet as your network,
type in the
Administrator ID
and
Password
and click
Change
.
By default:
ID:
admin
Password:
admin
6.
Click
OK
and wait 30 seconds.
7.
Click
OK
.
Page 8 / 15
11.
Click
Install
.
English
6
9.
Enter the User name and
Password, and then click
OK
.
By default:
User Name:
admin
Password:
admin
8.
Double click the IP camera to
access the browser configuration.
10.
Right click on the Internet
Explorer Information Bar and
select
Install
ActiveX Control
.
Page 9 / 15
14.
Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in.
English
7
13.
Click
Site Survey
. Select your
wireless network. If encryption
is enabled, select the proper
Authentication
type, enter the
Pre-Shared Key and then click
Apply
. (Example shows
WPA2-PSK. If your wireless
network does not support WPA,
select open or shared instead.
Contact your network
administrator for more
Note:
The TV-IP121W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
12.
Click
Setup
,
Network
and then
click
Wireless
.
Page 10 / 15
16.
Click
Live View.
English
8
Your installation is now complete.
Note
: For detailed information regarding the
TV-IP121W
configuration and
advanced settings, please refer to the Troubleshooting section, User's Guide
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
15.
Verify the Power and Link LEDs
are on.
19216811.live