1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TV-IP100W-Nv3
    5. /
  5. 15
Page 71 / 127 Scroll up to view Page 66 - 70
70
Getting Started
This section describes the User Interface of IPView Pro, with
detailed procedures for using the application.
To launch IPView Pro, click
Start
>
Programs
>
IPView Pro
>
IPView Pro
. The main screen will appear as below:
NOTE:
IPView Pro requires the system’s resolution setting up to 1024x768.
Please configure the resolution to 1024x768 or higher; otherwise, it may
shows incomplete screen when launching the program.
Page 72 / 127
71
Item Feature
NO.
Item
Description
1
Date/Time
Show current date/time.
2
Status Mode
Window
Show the camera’s status in this window.
Click the
Change Status Mode
button (
) on
the right lower corner of the window to change
the display mode:
Camera list mode
Camera information mode
3
View Window
Show the camera’s view in this window.
4
Connect/
Disconnect
Click to connect/disconnect the camera.
5
Rotate image
angle
Click to rotate the image shown in the View
Window.
6
Snapshot
Click to capture a still image from the View
Window.
7
Audio ON/OFF
Click to turn on/off the camera’s audio.
8
Zoom Mode
Click to zoom in/out the image in the View
Window.
Select the view mode from these buttons.
Show one camera in View Window.
9
View Mode
Buttons
Show four cameras in View Window.
Page 73 / 127
72
Show six cameras in View Window with
the first one as the major view.
Show eight cameras in View Window
with the first one as the major view.
Show nine cameras in View Window.
Show ten cameras in View Window with
the first two as the major views.
Show thirteen cameras in View Window
with the first one as the major view.
Show sixteen cameras in View Window.
Show the selected camera in full screen
view.
Enable displaying the video views in
circles.
10 Key Lock
Button
Click to lock/unlock the camera. When locked,
the user cannot operate any camera.
11 Power Button
Click to exit or minimize IPView Pro.
12 Record Button
Record video clip of the selected camera and
save it in the computer. The storage position can
be configured in System Configuration. When
you click the button, you can select
Manual
Record
,
Schedule Record
, or
Motion Record
.
13 Play Button
Play the recorded video file in the computer.
14 System
Configuration
Click to enter the System Configuration.
Page 74 / 127
73
Using IPView Pro
Adding a Camera
To add a camera:
1.
Click the
System Configuration
button to enter the System
Configuration.
If you are not sure of the camera’s IP address, you can click
Search
to search the available camera(s) within the network.
Page 75 / 127
74
2.
Select the camera you want by highlighting it, and then click
Add Camera
.
3.
Click
Save
, and then click the
System Configuration
button to
return to View Window. The selected camera’s video will be
displayed now. You can click
Save as
to save the selected
cameras into the desired path and the selected cameras can be
reloaded by
load
button.
The camera found
within the network.
Click the
Add
Camera
button.
The camera is added.

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top