TRENDnet TV-IP100W-Nv3 Router Manual PDF (Setup & Configuration Guide)

Page 46 / 127 Scroll up to view Page 41 - 45

45

•

WPA

-

PSK

: This is a special mode designed for home

and small business users who do not have access to

network authentication servers.

In this mode, the user

has to manually enter the starting password in their

access point or gateway, as well as in each PC on the

wireless network.

-

Advanced Setting:

In this field, you can setup more

advanced configuration.

•

Beacon Interval:

This option defines time interval

between two images sent.

•

Preamble:

A preamble is a signal used in wireless

environment to synchronize the transmitting timing

including Synchronization and Start frame delimiter.

Please NOTE that if you want to change the Preamble

type into

Long

or

Short

, please check the setting of

access point.

•

Authentication Type:

Open System

communicates

the key across the network.

Shared Key

allows

communication only with other devices with identical

WEP settings.

The default setting is

Both

.

Network

Click the

Network

item in the left column to setup the LAN

configuration of your camera.

Page 47 / 127

46

-

TCP/IP:

The items in this field display the information

of the wireless LAN, such as the Connection Mode

(Infrastructure or Ad-Hoc), Link, SSID, Channel,

Transmission Rate, and WEP Encryption.

•

IP Address Mode:

This field provides your with three

options to select the IP Address Mode:

Fixed IP

–

You can select this option and enter the IP

address directly.

The default settings are:

•

IP Address – 192.168.0.20

•

Subnet Mask – 255.255.255.0

•

Default Gateway – 0.0.0.0

Page 48 / 127

47

Dynamic Address (DHCP)

–

If your network uses the

DHCP server, select this option.

According to this

setting, the camera will be assigned an IP address from

the DHCP server automatically.

Every time when the

camera starts up, please make sure that the DHCP

server is set to assign a static IP address to your

camera.

PPPoE

–

If your application requires a direct

connection from an ADSL modem through the

camera’s RJ-45 LAN port, click this option and enter

the User ID and Password into the respective boxes.

(

You should have an ISP PPPoE account.

) The camera

will get an IP address from the ISP as starting up.

•

DNS IP Address:

DNS (Domain Name System)

server is an Internet service that translates domain

names into IP addresses.

Enter at least one DNS IP

Address in this field.

•

Dynamic DNS:

The Dynamic DNS service allows you

to alias a dynamic IP address to a static hostname in

any of the domains, allowing your computer to be

more easily accessed from various locations on the

Internet.

•

Second

HTTP

Port

:

The

default

port

for

communication is via port 80, and you can change it

according to your network configuration.

Select

Enable

from the option and enter the desired port

number in the following box.

•

UPnP

: UPnP is the architecture for pervasive peer-to-

peer network connectivity of intelligent appliances,

wireless devices, and PCs of all form factors.

Check

the

Enable

option to enable the function of your

camera.

Page 49 / 127

48

User

Click the

User

item in the left column to add, edit and delete

users for your camera.

-

User Access Control:

•

Access Control:

The administrator has the authority to

give permission for the privilege to control the device

to users by selecting

Enable

or

Disable

.

The default

setting is

No

.

-

Define Users:

Use this field to add or delete users for

your camera.

Page 50 / 127

49

•

Add User:

Enter the user name in this box, and enter

the user’s password assigned by the administrator.

The maximum password length is 8 (printable ASCII).

The administrator has the authority to give permission

for the privilege to control the

Upload/E-mail Video

control to the users by selecting

Yes

or

No

to activate

the

Upload/E-mail Video

.

To add a new user’s name, enter the necessary

information first and click the

Add

button.

-

Delete User:

Select the user you want to delete from the

pull-down menu, and then click the

Delete

button.

•

User List

: This list displays the current users status of

your camera.

DateTime

Click the

DateTime

item in the left column to setup time and date

for your camera, providing correct information for the remote

users who might be thousands of miles away from the camera’s

location.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share