Page 106 / 127
Scroll up to view Page 101 - 105
105
E Xplug Control Installation
Installation to Web Server
1.
Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2.
Setting
(Configuration):
From the Web Configuration menu select “System” and
under the “Loading ActiveX From” input web server
location
(http://www.web server location.com/
).
Once the settings are completed, the user now is able to access the
Camera from the web browser by selecting the image view –
ActiveX mode.
Important Information
It is highly recommended to install the Xplug Control
application to the Web Server for IE 5.0.
It must be
installed to a Public Domain with Fixed IP address.
Page 107 / 127
106
Installation to Local PC
Insert the CD-ROM into the CD-ROM drive to initiate the auto-
run program.
Once completed, a menu screen will appear as
below:
To install Xplug Control, click the “
Xplug Control
" button to
activate the installation procedure for the plug-in program.
Page 108 / 127
107
Once executed, a prompt will appear requesting the input of the
desired language selection.
Make the desired selection and click
“
OK
” to continue.
The Welcome screen will appear.
Click the “
Next
” button to
proceed with the installation.
Page 109 / 127
108
The License Agreement prompt will appear as below.
Read the
details carefully and click the “
Yes
” button to continue with the
installation procedure.
Click the “
Finish
” button to complete Setup of the Xplug Control
Utility program for the Wireless Camera.
Page 110 / 127
109
F Adjust Camera Focus
To adjust the focus of the lens, you need to turn the lens slowly in
either clockwise or anti-clockwise direction until the desired
image appears.
DO NOT over turn the lens in either of the
directions, as it will be out of focus.
NOTE:
You can further adjust the Wireless Camera's image
quality through System Administration – Image of Web
Configuration.
Please refer to Web Configuration section for
further details.
Warning
Direct exposure to sunlight may cause permanent damage to the
CMOS sensor.
Therefore do not expose the Internet Camera’s lens
directly to sunlight.
When operation is required in glaring light
environment, it is recommended to use an iris lens.
The Internet Camera is designed for indoor usage and if your
application requires prolong exposure to sunlight, a sun visor is
recommended to protect the Internet Camera.
19216811.live