Page 81 / 127
Scroll up to view Page 76 - 80
80
System Configuration Screen
Camera Configuration
In this field, you can add/delete the camera (as described in the
previous section). Also, you can configure the following settings:
Web Configuration
In the top low, selecting the
Administration
item will launch the
Web Configuration Utility in View Window.
Page 82 / 127
81
You can configure these settings according to the description in
Chapter 5, Using the Camera
. Click
Back
to exit the Web
Configuration Utility.
Motion Configuration-1
The
Motion Configuration-1
item provides the commands for
motion detection control. Before configuring, you should select
one camera from the pull-down menu.
-
Detect Region:
•
Full picture –
When you select this option, the camera
will monitor the whole area.
Select one camera.
Select
Custom region
.
Region 1
.
Region 2
.
Page 83 / 127
82
•
Custom region –
Click
Add Region
, and then use
mouse to draw an area in the view screen; when some
motion detected within the area, the camera starts
recording automatically. You can set multiple areas in
the view screen. Click
Delete Region
to remove the
area selected. Click
Clear All
Region
to remove all
areas in the view screen.
-
Sensitivity Level:
Move the slide bar to adjust the
sensitivity level for detecting motion to record video.
Motion Configuration-2
The
Motion Configuration-2
item allows you to configure to the
alarm and e-mail setting.
Page 84 / 127
83
-
Invoke Alarm:
Select this option to enable alarm when
some motion detected by the system.
-
Send e-mail:
When this option is checked, click the
Mailing
Configuration
in the left column to enter the required
information
(see the following section).
-
Play music:
You can use the music file to alert the event.
Click
Browse music file
to select the desired music, and set
the
Interval time
.
-
Trigger1 active:
You can check this option to set the
Trigger-On holding time
.
Page 85 / 127
84
Tools
The
Tools
item allows you to configure to the alarm and e-mail
setting.
-
Reset:
Restore the original setting of your camera.
Do you
really want to reset this device? Click
Yes
in the pop-up
dialog box to confirm.
-
Factory Reset:
Restore the factory default settings of the
camera. Do you really want to factory reset this device? Click
Yes
in the pop-up dialog box to confirm.
-
Update Firmware:
When new firmware is available, you
can upgrade it using this option. Click
Browse
to find the
firmware file, and then click
Update
.
19216811.live