TRENDnet TS-I300W Router Manual PDF (Setup & Configuration Guide)

Page 6 / 12 Scroll up to view Page 1 - 5

English

4

2.

Click on

Search device

, and then

select the Storage Server.

3.

Configure the

IP (IP address)

,

Network

(

Subnet mask)

,

Gateway

and then click

Modify

.

Note: The IP Address must match

the network segment of your

network.

3. Configure the Storage Server

Note: Install and use the Easy Search Utility to discover all the TS-I300/TS-

I300W on the network, assign IP Address, change the host name and

workgroup, and mount or unmount the hard drive.

For Windows Users

1.

Insert the

Utility CD-ROM

into

your computer's CD-ROM Drive

and then click

Easy Search Utility

.

4.

Click

Connect to webpage

.

Page 7 / 12

English

5

5.

Click

Format Hard Drive

.

6.

Click

OK

.

7.

Click

Restart.

8.

Click

OK.

Note: If your hard drive has already been formatted, please skip to step 9.

If

you are attaching a brand new hard drive, please continue on to step 5.

Page 8 / 12

English

6

9.

Enter the User name and

Password, and then click

Config

.

User Name:

admin

Password:

admin

10.

Click

Advanced

and then

Wireless.

Note: For the TS-I300 skip to section 4.

For the TS-I300W continue on to step

10.

11.

Click

Access Point

, and then

click

Enable.

Enter an SSID and

then click

Apply

.

Your configuration is now complete.

For detailed information regarding the

TS-I300/TS-I300W's

configuration and

advanced settings, please refer to the Troubleshooting section, User's Guide

CD-ROM, or TRENDnet's website at http://www.trendnet.com.

Page 9 / 12

English

7

1.

Select the hard drive, and then

click

Mount

.

2.

Click

OK

.

3.

Double-click on

My Computer

.

Then double-click on any mounted

hard drive under

Network Drives

.

4. Accessing Storage Devices on TS-I300/TS-I300W

Your storage device is ready for access

Page 10 / 12

8

Q1:

A1:

Q2:

A2:

Can I connect or disconnect the USB storage device while the TS-I300/TS-I300W is on?

Yes, you can connect or disconnect any external USB device while the computer is on,

I specified the IP address http://192.168.1.2 in my Internet Browser's Address Bar, but

an error message says “The page cannot be displayed.” How can I get into the TS-I300/TS-

I300W's web configuration page?

First, check your hardware settings again by following the instructions in section 2.

Second, make sure the LAN and WLAN (TS-I300W) lights are lit.

Third, make sure the

because the USB interfaces are Plug-and-Play and hot-pluggable.

Just press on the

Unmount button on the unit or open the utility program and press unmount for the USB

device.

TS-I300/TS-I300W is assigned an IP Address in the same subnet as your network.

You may

need to adjust the TCP/IP settings on your computer to match the storage server.

Please

see the steps below:

Troubleshooting

1.

Go into the

Control Panel

and double-click

the

Network Connections

icon, right-click

the

Local Area Connection

icon and then

click

Properties

.

2.

Click

Internet Protocol (TCP/IP)

and then

click

Properties

.

Then click on

Use the

following IP address

, and make sure you

assign your network adapter an IP address

in the subnet of 192.168.1.x.

Q3:

A3:

I am unable to mount or access the IDE hard drive.

What should I do?

First, verify that the IDE hard drive has been properly installed (see section 2).

Second,

disable any software firewall programs (e.g. Norton Internet Security, McAfee).

If you are

running Windows XP, disable the built-in XP firewall.

Third, make sure the

TS-I300/TS-I300W is assigned an IP Address in the same subnet as your network.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share