Given below is full router user manual of TRENDnet TS-I300 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 12
Table of Contents
Version 07.06.2006
English
.....................................................................................................
Troubleshooting
........................................................................................
1
1
2
4
7
8
1. Before You Start
2.
.........................................................................
................................................................................
Hardware Installation
Configure the Storage Server
4. Accessing Storage Devices on TS-I300/TS-I300W
...........................
3.
............................................................
Page 3 / 12
System Requirements
Application
Web Browser: Internet Explorer (5.5 or higher)
A computer with a network adapter properly installed.
A network Switch or Hub with an available network LAN port.
A RJ-45 network cable.
TS-I300/TS-I300W
User's Guide CD-ROM
Quick Installation Guide
Mounting Stand
AC Power Adapter (12V DC, 3.0A)
Package Contents
1. Before You Start
English
1
1 x 2dBi Detachable Antenna (TS-I300W)
IDE Internal Hard Drive or USB 2.0 Storage Device (i.e. flash drive,
external hard drive; not included)
Windows XP, 2000, NT, ME, 98, Linux
HD
DATA
USB 2.0 & IDE Network Storage Enclosure
(TS-I300)
Or
USB 2.0 & IDE Wireless Network Storage Enclosure
(TS-I300W)
Page 4 / 12
2. Hardware Installation
English
2
1.
Remove the two screws from the
rear panel to detach the cover.
2.
Make sure the jumper settings on
the hard drive is set to Master.
Note: Before installing the IDE hard drive, the jumper settings must be set to
Master.
4.
Place the hard drive onto the metal
bracket and secure it with four
mounting screws.
3.
Connect the IDE cable and power
cable to the hard drive.
5.
Replace the cover and secure the
two screws.
Page 5 / 12
English
3
6.
Attach the mounting stand to the
Storage Server.
7.
Connect a RJ-45 cable from the
Switch/Hub to the
LAN
port of the
Storage Server and then connect
the 2dBi Detachable Antenna
(TS-I300W).
8.
Connect the External Power
Adapter to the Storage Server and
then to a power outlet.
9.
Verify that the following panel lights
are on:
Power
,
LAN, HDD
and
WLAN
(TS-I300W).
Your hardware installation is now complete.
19216811.live