Page 6 / 19
Scroll up to view Page 1 - 5
4
English
3. Configure your Powerline AP/Router
The following section will help you configure your AP/Router to connect to the
Internet and your PCs. The setup differs and is dependent on the type of
Internet connection you have. If you are not sure what type of connection you
have, please contact your ISP to obtain the required information, which is listed
in the
Prepare for Installation
section at the beginning of this Quick
Installation Guide.
1.
Open your web browser, type
in the Address bar, and
press
Enter
.
2.
An authentication window will appear. Enter the username and password,
and then click
OK
. By default, the username is "admin", and the password is
“admin.”
NOTE:
To reset the password on the AP/Router, refer to the User's
Guide CD-ROM.
Page 7 / 19
5
English
3.
Click
WAN
. This page will allow you to configure the TPL-111BRP for
Internet access. If your ISP requires you to enter a
Host Name
and
Domain
Name, please type this information in the appropriate fields.
Select your
Connection Type from the pull down menu, (DHCP, Static IP, PPPoE, or
PPTP) and proceed to the appropriate subset of instructions below.
DHCP
4.
Select
DHCP
as the Connection Type.
5.
Go to step 15.
Page 8 / 19
6
English
Static
6.
Select
Static
as the Connection Type.
7.
Enter the IP address, subnet mask, default gateway, and domain name
server (DNS) provided by your ISP.
8.
Go to step 15.
PPPoE
9.
Select
PPPoE
as the Connection Type,
and scroll down to the
PPPoE
section.
10.
Enter your username and password.
11.
Go to step 15.
NOTE:
Select
Enabled
from the
PPPoE
Keep Alive
pull-down menu;
this is the recommended setting for most users.
Page 9 / 19
7
English
PPTP
12.
Select
PPTP
as the Connection Type, and scroll down to the
PPTP
section.
13.
Enter the PPTP Gateway Address, username, and password provided by
your ISP.
14.
Go to step 15.
15.
Scroll down and click
Apply
.
16.
Click
Continue.
NOTE:
Select Enabled from the
PPTP Keep Alive
pull-down menu; this
is the recommended setting for most users.
Page 10 / 19
8
English
4. Wireless Configuration
1.
Click
Wireless
. The recommended settings will be automatically selected for
you. You may, however, choose to select a different channel and/or network
name (SSID).
2.
Choose your country from the pull-down menu.
NOTE:
You must remember your “network name (SSID),” as you will
need it when you configure your wireless network adapter to connect to
your access point. If you wish to enable WEP for encryption-based
security, refer to the included User's Guide CD-ROM for instructions.
19216811.live