TRENDnet TK-IP101 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 17 Scroll up to view Page 6 - 10

8.

Type in the Login user ID and

password and click

OK

.

Login (User ID):

superuser

Password:

superu

6.

Double click the

IPViewer

icon.

English

9

7.

Type in 192.168.1.200:5900 and

click

OK

.

Java

1.

Follow step 1, 2, and 3 in section 3

to log on to the browser

configuration.

2.

Click

Download

and then

Viewers

.

In the JavaTM section,

click

Download.

Page 12 / 17

4.

Type in 192.168.1.200:5900 and

click

OK

.

5.

Type in the Login user ID and

password and click

OK

.

Login (User ID):

superuser

Password:

superu

English

10

2.

Follow the steps in the

Viewing

Locally

section above for installing

and opening up the viewer.

1.

Logon to your router and open

ports 5900~5909.

Please refer to

your router's manual or contact

your network administrator for

more information.

Viewing Remotely

3.

Click

Open

.

Page 13 / 17

3.

Type in [your public ip

address]:5900 (for example:

82.165.130:180: 5900) and click

OK

.

If you do not know your public

IP address, please contact your

network administrator or Internet

Service Provider for more

information.

4.

Type in the Login (user ID) and

password and click

OK

.

Login (User ID):

superuser

Password:

superu

English

11

Page 14 / 17

Q1:

Q2:

A2:

Q3:

A3:

How do I configure TCP/IP settings on my computer?

I typed https://192.168.1.200:5908 in my Internet Browser's Address Bar, but

an error message says “The page cannot be displayed.” How can I get into the

TK-IP101 web configuration page?

First, check your hardware settings again by following the instructions in

section 2.

Second, make sure the power and link lights are lit.

Third, make sure

the TCP/IP settings are configured properly (see Q1).

Fourth, since the

TK-IP101’s default IP address is 192.168.1.200, make sure that no other network

devices are assigned an IP address of 192.168.1.200:5908

I have the KVM switch connected properly, but my keyboard and mouse don’t

work.

What should I do?

First, make sure the power adapter is plugged into your KVM switch.

Second,

make sure your PS2 or USB ports are working properly by connecting your mouse

and keyboard directly to the PS/2 or USB port computer. Third, once you confirm

that the PS/2 or USB ports are functional, please reboot your computers, and try to

use the KVM switch again.

Fourth, if your computer is running Windows 98SE,

you may need to download and install the USB hot fix.

Please go tothis link for

download and installation instructions: http://support.microsoft.com/kb/q240075.

Once the hot fix is installed, follow the installation instructions in Section 2.

12

Troubleshooting

1. Go into the

Control Panel

and double-

click the

Network Connections

icon,

right-click the

Local Area Connection

icon and then click

Properties

.

2. Click

Internet Protocol (TCP/IP)

and

then click

Properties

.

Then click on

Use the following IP address

, and

make sure you assign your network

adapter an IP address in the subnet of

192.168.1.x.

Page 15 / 17

Q4:

A4:

Q5:

A5:

Q6:

A6:

Q7:

A7:

Q8:

A8:

The video is bad or grainy.

What should I do?

First, make sure the cables are securely connected.

Second, the maximum

resolution supported is 1600 x 1200.

If the resolution configured on your computer

is higher, you must change it to a lower resolution.

Contact your operating

system support for more instructions

I am unable to switch between computers using my KVM Switch’s hot keys.

What should I do?

Press on the Num Lock key for 5 seconds to activate the hot keys.

The cursor on the local computer and the remote computers in the IPviewer

are not aligned.

What should I do?

Go to your mouse properties and go to pointer options.

Set

the pointer speed

is set to the middle, uncheck enhanced pointer precision and uncheck

Automatically move pointer to the default button in a dialog box.

In the IPviewer,

press the mouse synchronization hot key.

By default, the hot key is CTRL CTRL

Home.

If your keyboard does not have a CTRL or Home Key, log on to browser

configuration (see Section 3), click KVM Server, click IPViewer Connection and

select the desired key for the IPViewer Hot Keys and Mouse Resynchronize Key.

I forgot the administration password.

How do I reset my TK-IP101?

Press on the reset button using a pen or paperclip for 10 seconds.

The

default password is admin.

How can I view my computers remotely?

First, open up ports 5900 to 5909 on your router.

Contact the router

manufacturer or your network administrator for more information.

Second, type in

http://[your public ip address]:5908 in your browser.

Third, follow the Windows or

Java instruction in Section 3 for installing the viewer.

Fourth, when the connection

details window appears, type in your public IP address: 5900.

If you still encounter problems or have any questions regarding the TK-IP101, please

contact TRENDnet’s Technical Support Department.

13

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share