Page 6 / 12 Scroll up to view Page 1 - 5
English
4
1.
Insert the
Utility CD-ROM
into
your computer's CD-ROM Drive.
2.
Click
Run autorun.exe
(Windows
Vista only).
3. Configure the Print Server
Note:
Disable any anti-virus and firewall programs before starting hardware
installation.
For Windows Users
4.
Click
Next
.
3.
Click
Setup Wizard
.
Page 7 / 12
Note:
If you have the TE100-P11, skip to step 11. If you have the TEW-P11G,
continue on step 8.
English
5
5.
Select the print server and then
click
Next
.
6.
If desired, change the
Device
Name
,
Domain Name
and add a
Comment
(optional).
Then click
Name
.
7.
Select the
Obtain IP Address
automatically
and then click
Next
.
8.
Select the desired wireless
network and click
Next
.
Page 8 / 12
English
6
10.
If enabled, enter the encryption
key for your wireless network and
then click
Next
.
This example
shows WPA2-PSK.
9.
The correct wireless settings
should be automatically configured.
Then click
Next
.
11.
Click
Finish
.
Page 9 / 12
Print Server configuration is now complete.
7
English
For detailed information regarding adding printers for Windows
98SE/ME/2000/XP/2003 Server/Vista, please refer to the User's Guide on the
Utility CD-ROM or TRENDnet's website at www.trendnet.com
13.
Disconnect the RJ-45 cable and
unplug the power.
Then plug the
power back in (TEW-P11G only).
12.
Click
OK
.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
Page 10 / 12
8
Troubleshooting
Q1.
A1.
Q2.
A2.
Q3.
A3.
Q4.
A4.
The Setup Wizard is unable to see my printer server.
What should I do?
First, double check your hardware connections; make sure that the print
server is powered
ON
and is properly connected. Second, click
Refresh
.
Third,
disable any software firewall programs (e.g. ZoneAlarm).
If your computer is
running Windows XP or Vista, disable the built in firewall program.
Fourth, unplug
the power to the print server, wait 15 seconds, then plug the power back in.
How do I add a printer to my computer?
Please refer to the User's Guide on the CD-ROM for instructions on adding a
printer.
I configured my print server to automatically receive an IP Address from a
DHCP server but I can't log in to the browser configuration for the print server.
Open the Setup Wizard (See 3. Configure the Print Server) to locate your print
server's IP Address. Then type in the IP address into your browser.
After I successfully configured the TEW-P11G to match my wireless network
settings, I can not connect to the print server.
First, verify that the wireless settings match your wireless network settings.
Second, make sure to disconnect the Ethernet cable from the print server and
verify that the
WIRELESS
LED is lit.
If you still encounter problems or have any questions regarding the
TE100-P11/TEW-
P11G
, please refer to the User's Guide included on the Utility CD-ROM or contact
TRENDnet's Technical Support Department.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top