TRENDnet TEW-671BR Router Manual PDF (Setup & Configuration Guide)

Page 6 / 14 Scroll up to view Page 1 - 5

English

4

5.

Click

6.

The TEW-671BR will attempt to

auto detect your Internet

connection. Follow the wizard

instructions and continue on to

step 8.

8.

Follow the wizard instructions to

complete the configuration.

Note: Each Internet Connection

type may have different options.

Configure the settings based on

information provided by your ISP.

7.

This screen will appear if the

TEW-671BR is unable to auto

detect your Internet connection.

Click

Manual Config

.

Page 7 / 14

English

5

9.

Use your mouse to select the

desired security level (lowest for no

encryption, highest for WPA2-

PSK).

11.

Use your mouse to select the

desired security level (lowest for

WEP, highest for WPA2-PSK).

12.

Enter the desired

SSID

and

Key

.

Then click

By default, the

SSID for 5G WLAN is

TRENDnet671A.

10.

Enter the desired

SSID

and

Key

.

Then click

By default, the

SSID for 2.4G WLAN is

TRENDnet671N.

Note:

The examples below are for WPA2-PSK security.

If you select WPA-

PSK or WPA2-PSK, make sure your wireless adapters support WPA or WPA2.

If your wireless adapters do not support WPA or WPA2, then select WEP.

Page 8 / 14

English

6

Your configuration is now complete.

For detailed information regarding the

TEW-671BR’s

configuration and

advanced settings, please refer to the Troubleshooting section, User's Guide

CD-ROM, or TRENDnet's website at http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at:

www.trendnet.com/registe

r

Thank you for choosing TRENDnet

13.

Setup is successful.

Click

Reboot

.

Page 9 / 14

7

Troubleshooting

2.

Click

Internet Protocol Version

4(TCP/IPv4)

and then click

Properties.

Then

click on

Obtain an IP address

automatically.

Q1:

A1:

I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error

message says “The page cannot be displayed.” How can I get into the TEW-

671BR's web configuration page?

First, check your hardware settings again by following the instructions in

Section 2.

Second, make sure the

LAN (1,2,3 or 4)

and

WLAN(2.4GHz/5GHz)

lights are lit.

Third, make sure your TCP/IP settings are set to

Obtain an IP

address automatically

(see the steps below).

1.

Go into the

Control Panel

, click

Network and Internet

, click

Network

and Sharing Center

, click

Manage

Network Connections

and then right-

click the

Local Area Connection

icon

and then click

Properties

.

Windows Vista

1.

Go into the

Control Panel

, double-click

the

Network Connections

icon and

then right-click the

Local Area

Connection

icon and then click

Properties

.

Windows XP/2000

Page 10 / 14

8

Fourth, press on the factory reset button for 15 seconds.

I am not sure what type of Internet Account Type I have for my Cable/DSL

connection. How do I find out?

Contact your Internet Service Provider's (ISP) support service for the correct

information.

I configured my router with my ISP settings, but I can not get onto the

Internet.

What should I do?

First, verify that you can get onto the Internet with a direct connection into your

modem. Second, contact your ISP and verify all the information that you have in

regards to your Internet connection settings is correct.

Third, power cycle your

modem and router.

Unplug the power to the modem and router.

Wait 30

seconds, and then reconnect the power to the modem.

Wait for the modem to fully

boot up, and then reconnect the power to the router.

All the settings are correct, but I can not make a wireless connection to the

Router.

What should I do?

First, double check that the

WLAN (2.4GHz/5GHz)

light on the Wireless

Router is lit.

Second, power cycle the TEW-671BR.

Unplug the power to the

TEW-671BR.

Wait 15 seconds, then plug the power back in to the TEW-671BR.

Third, contact the manufacturer of your wireless network adapter and make sure

the wireless network adapter is configured with the proper SSID.

The preset SSID

of the Access Point is

TRENDnet671N

(2.4GHz) and

TRENDnet671A

(5GHz)

.

If you still encounter problems or have any questions regarding the

TEW-671BR,

please

contact TRENDnet's Technical Support Department.

Q2:

A2:

Q3:

A3:

Q4:

A4:

2.

Click

Internet Protocol (TCP/IP)

and

then click

Properties.

Then

click on

Obtain an IP address automatically.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share