TRENDnet TEW-652BRP Router Manual PDF (Setup & Configuration Guide)

Page 6 / 12 Scroll up to view Page 1 - 5

English

4

5.

Enter a

Password

, verify the

Password

and then click

default, the

Password

is

admin

.

6.

Select your Time Zone and then

click

7.

Click

Note: Do not change

default settings unless it is

conflicting with your existing

hardware.

Page 7 / 12

English

5

9.

Click

Note:

It is recommended that you enable encryption on the wireless router.

Please refer to the User Guide on the User's Guide CD-ROM for information on

setting up encryption on the wireless router.

10.

Click

Restart

.

8.

Configure the settings based on

information provided by your ISP.

Follow the wizard instructions to

complete the configuration.

Note: Each Internet Connection

type may have different options.

Page 8 / 12

English

6

Your configuration is now complete.

For detailed information regarding the

TEW-652BRP's

configuration and

advanced settings, please refer to the Troubleshooting section, User's Guide

CD-ROM, or TRENDnet's website at http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at:

www.trendnet.com/registe

r

Thank you for choosing TRENDnet

11.

Click

Close

.

Page 9 / 12

7

Troubleshooting

Q1:

A1:

I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error

message says “The page cannot be displayed.” How can I get into the TEW-

652BRP’s web configuration page?

First, check your hardware settings again by following the instructions in

Section 2.

Second, make sure the LAN and WLAN lights are lit.

Third, make sure

your TCP/IP settings are set to

Obtain an IP address automatically

(see the

steps below).

1.

Go into the

Control Panel

, double-click

the

Network Connections

icon and

then right-click the

Local Area

Connection

icon and then click

Properties

.

2.

Click

Internet Protocol (TCP/IP)

and

then click

Properties.

Then

click on

Obtain an IP address automatically.

Fourth, press on the factory reset button for 15 seconds.

I am not sure what type of Internet Account Type I have for my Cable/DSL

connection. How do I find out?

Contact your Internet Service Provider's (ISP) support service for the correct

information.

The Wizard does not appear.

What should I do?

First, click on Wizard on the left hand side.

Second, near the top of the

browser, “Pop-up blocked” message may

appear.

Right click on the message and

select Always Allow Pop-ups from This Site.

Third, disable your browser's pop up

blocker.

Q2:

A2:

Q3:

A3:

Page 10 / 12

8

Q4:

A4:

Q5:

A5:

I went through the Wizard, but I can not get onto the Internet.

What should I

do?

First, verify that you can get onto the Internet with a direct connection into your

modem.

Second, contact your ISP and verify all the information that you have in

regards to your Internet connection settings is correct.

Third, power cycle your

modem and router.

Unplug the power to the modem and router.

Wait 30

seconds, and then reconnect the power to the modem.

Wait for the modem to fully

boot up, and then reconnect the power to the router.

I can not make a wireless connection to the Router.

What should I do?

First, make sure that the antenna is connected to the TEW-652BRP.

Second,

double check that the WLAN light on the Router is lit.

Third, power cycle the TEW-

652BRP.

Unplug the power to the TEW-632BRP.

Wait 15 seconds, then plug the

power back in to the TEW-652BRP.

Fourth, contact the manufacturer of your

wireless network adapter and make sure the wireless network adapter is

configured with the proper SSID.

The preset SSID is TRENDnet.

If you still encounter problems or have any questions regarding the

TEW-652BRP,

please contact TRENDnet's Technical Support Department.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share