TRENDnet TEW-651BRv2 Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of TRENDnet TEW-651BRv2 router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 16
Quick Installation Guide
TEW-651BR
1.04
Page 2 / 16
Table of Contents
Version 08.02.2010
English
1
Troubleshooting
6
Wireless Tips
7
1. Before You Start
1
2. Hardware Installation
2
3. Configure the Wireless Router
3
Page 3 / 16
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
РУССКИЙ
1. Before You Start
Package Contents
System Requirements
1
?
?
?
?
?
TEW-651BR
User's Guide CD-ROM
Multi-Language Quick Installation Guide
Cat. 5 Ethernet Cable (1.5m/4.9ft)
AC Power Adapter (5V DC, 1.2A)
?
?
?
?
A computer with a wired or wireless network adapter properly installed
Web Browser: Internet Explorer (5.0 or higher)
Broadband Internet
Installed Cable or DSL Modem
Page 4 / 16
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
РУССКИЙ
2. Hardware Installation
2
Note:
Gather all information related to your Internet Connection before you start.
If
necessary, contact your Internet Service Provider (ISP).
Cable/DSL Modem
Internet
1.
Verify that you have an Internet connection
when connecting your computer directly to the
Cable or DSL modem. Open your browser (e.g.
Internet Explorer) and type in a URL (e.g.
http://www.trendnet.com) in the address bar.
4.
Connect the AC Power Adapter to the wireless
router and then to a power outlet.
5.
Verify that the following panel lights are on:
Power, LAN, WAN
and
WLAN.
2.
Connect one end of a RJ-45 cable to one of the
TEW-651BR's LAN ports.
Connect the other
end of the cable to the computer's Ethernet
port.
3.
Connect one end of a RJ-45 cable to the
TEW-651BR’s WAN port. Connect the other
end of the cable to your modem.
Page 5 / 16
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
РУССКИЙ
3
3. Configure the Wireless Router
Note:
It is recommended that you configure the Wireless Router from a wired computer.
1.
Open your web browser, type
in the Address bar, and
then press
Enter
.
2.
Enter the
User Name
and
Password
, and then
click
Log In
.
User Name
: admin
Password:
admin
3.
The Wizard will automatically appear. Click
Wizard
if the Wizard does not automatically
appear.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top