English

4

10.

Select

Access Point

and then

click

Next

.

Note: For AP Client setup, please

refer to the User's Guide for step

by step instructions.

The User's

Guide can be found on this

product's CD-ROM.

11.

Select

Dynamic IP Address

Configuration

and then click

Configure

.

9.

Enter a password and then click

Login

.

The default password is

admin

.

12.

Select

Manual setup

and then

click

Next

.

English

5

16.

Select the desired

WPA

mode,

enter characters for your Pre-

Shared key, keep

Cipher Type

as

TKIP and AES

and then click

Next

.

For WPA-PSK or WPA2-

PSK, the Pre-Shared Key must

be between 8 and 63 ASCII or 64

HEX characters.

Make sure to

copy down the Pre-Shared Key.

14.

Select the desired

Wireless

Mode

and then click

Next

.

15.

Select a Security Mode and then

click

Next

(example shows

WPA-PSK).

13.

Enter a SSID and then click

Next

.

By default, the SSID is

TRENDnet638

.

English

6

19.

Click

Confirm

to apply the

settings.

18.

Give the file a name, then click

Save

(optional).

20.

Click

Exit

.

17.

Click

Save

(optional).

English

7

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at:

www.trendnet.com/registe

r

Thank you for choosing TRENDnet

Note:

To connect a wireless computer to the TEW-638APB, refer to Question 1

in the Troubleshooting section.

Your configuration is now complete.

For detailed information regarding the

TEW-638APB's

configuration and

advanced settings, please refer to the Troubleshooting section, User's Guide

CD-ROM, or TRENDnet's website at http://www.trendnet.com.

21.

Click

Yes

to exit.

8

Troubleshooting

Q1:

A1:

A2:

A3:

A4:

A5:

All the settings are correct, but I can not make a wireless connection to the Access

Point.

First, double check that the wireless LED on the Access Point is lit.

Second, power cycle

the Access Point.

Unplug the power to the Access Point.

Wait 15 seconds, then plug the

power back in.

Third, contact the manufacturer of your wireless network adapter.

Make sure

the wireless network adapter is configured with the proper SSID.

The default SSID of the

Access Point is

TRENDnet638.

If you have enabled any encryption on the Access Point,

make sure to configure the wireless network adapter with the same Pre-shared key.

: I am trying to connect additional wireless adapters, but I don't remember the encryption

(network) key.

What should I do?

From a wired computer, log on to the access point configuration page.

Click

Wireless ->

Security

.

The encryption key will be listed here.

: I have a wireless adapter that supports WiFi Protected Setup (WPS) push button setup.

How do I setup WPS between the

TEW-638APB and my wireless adapter?

First, press on the

WPS

button on the front of the TEW-638APB for 10 seconds.

Second, refer to your wireless adapters for instructions on setting up WPS.

: I followed the Quick Installation Guide and setup a new password.

When I log in to the

browser configuration an access error message appears.

What should I do?

The default user name is

admin

and the default password is

admin

.

When you log in to

the browser configuration for the first time, make sure to enter

admin

for user name.

Do not

leave the user name field blank.

: How do I configure AP mode on the TEW-638APB?

Please refer to the User Guide.

The User Guide is on the Utility CD-ROM drive.

Q2

Q3

Q4

Q5

If you still encounter problems or have any questions regarding the

TEW-638APB,

please contact TRENDnet's Technical Support Department.